Mikhail Zaturenskiy wrote:
Is it possible to look at a post-fixup device tree in u-boot? It looks like u-boot is not updating my dts with the values for my RAM, cpu frequency, etc. before loading the kernel.
Is there any obvious reason for this? Am I missing a #define of some sort?
Hi Mikhail,
The board fixup is a board-specific thing. Are you doing that in your board configuration?
If you have CONFIG_OF_BOARD_SETUP defined (if you don't that probably is the answer to your missing #define question), you can run fdt boardsetup and then fdt print / to see what the fixed up tree looks like.
You can also run the bootm command step-by-step (some steps may not apply to your board)...
bootm start bootm loados bootm ramdisk bootm fdt bootm bdt bootm cmdline bootm prep
Print out the tree: fdt print /
(last step is...) bootm go
Best regards, gvb