Hi Jean-Jacques,
On 21/09/2018 10:50, Lukasz Majewski wrote:
Hi Jean-Jacques,
Hi Marek,
I haven't heard of you on this series.
It is already a resend and has been tested on 2 platforms (zcu100 and dra7/am57).
Can you please consider it for inclusion?
This is not Marek to blame for the delay - I had some non open source tasks to finish (and I do apologise for this situation).
Thanks. I am not blaming anyone.
:-)
Could you check the build result? https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980
I do see some issues with "Freescale ARM32/ARM64".
I just wanted to make sure that this wasn't lost in limbo.
Your patches are now under build testing on travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980
I will send the PR after CI finish.
Thanks,
JJ
On 04/09/2018 15:42, Jean-Jacques Hiblot wrote:
Resending this series after rebasing on top of latest u-boot.
This series aims at bringing improvements to the dwc3_generic driver so that it can be used by most of the platforms using the dwc3 controller.
I tested this on with DRA7 and AM57x platforms for both Peripheral and Host operations. The code to enable DM USB host & dev support for those platforms will be submitted in a separate series.
Michal Simek has tested this series: " I have tested it on zcu100 with usb stick, usb to ethernet converter and also dfu. Tested-by: Michal Simek michal.simek@xilinx.com"
Enhancements:
- use separate Kconfig option for DM USB Periphal and DM USB Host.
This allow platforms to keep their non-DM USB peripheral code and use the DM USB host.
- fixes the bind/probe confusion in dwc3_generic. The probe is
done when the USB device is first needed.
- handles PHYs when in the peripheral mode. The code to handle the
PHYs is shared with the host side
- handles clock and reset
- bind host controller to the more generic driver 'xhci-dwc3'
Changes in v2:
- Updated commit log
- Fixed typo in thordown.c
- select DM_USB_DEV by default for zynqmp platforms
Jean-Jacques Hiblot (7): usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers usb: introduce a separate config option for DM USB device usb: udc: implement DM versions of usb_gadget_initialize()/_release()/_handle_interrupt() dwc3_generic: do not probe the USB device driver when it's bound dwc3: move phy operation to core.c dwc3-generic: Handle the PHYs, the clocks and the reset lines dwc3-generic: Add select_dr_mode operation
arch/arm/Kconfig | 2 + cmd/fastboot.c | 4 +- cmd/rockusb.c | 4 +- cmd/thordown.c | 4 +- cmd/usb_gadget_sdp.c | 4 +- cmd/usb_mass_storage.c | 4 +- common/dfu.c | 6 +- drivers/usb/Kconfig | 6 ++ drivers/usb/dwc3/Kconfig | 7 +- drivers/usb/dwc3/core.c | 86 +++++++++++++++- drivers/usb/dwc3/dwc3-generic.c | 207 +++++++++++++++++++++++++++++--------- drivers/usb/dwc3/ep0.c | 1 - drivers/usb/gadget/ether.c | 38 +------ drivers/usb/gadget/udc/udc-core.c | 44 +++++++- drivers/usb/host/xhci-dwc3.c | 93 ++--------------- include/dwc3-uboot.h | 7 ++ include/linux/usb/gadget.h | 18 ++++ 17 files changed, 351 insertions(+), 184 deletions(-)
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de