From: Fabio Estevam festevam@denx.de
Currently, spl_end points to the __bss_end address, which is an external RAM address instead of the end of the SPL text section in the internal RAM.
This causes boot failures on imx6-colibri, for example:
``` Trying to boot from MMC1 SPL: Image overlaps SPL resetting ... ``` Fix this problem by assigning spl_end to _image_binary_end, as this symbol properly represents the end of the SPL text section.
From u-boot-spl.map:
.end *(.__end) 0x00000000009121a4 _image_binary_end = .
Fixes: 77aed22b48ab ("spl: spl_legacy: Add extra address checks") Reported-by: Francesco Dolcini francesco.dolcini@toradex.com Signed-off-by: Fabio Estevam festevam@denx.de Tested-by: Tom Rini trini@konsulko.com --- Changes since v1: - None.
common/spl/spl_legacy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/spl/spl_legacy.c b/common/spl/spl_legacy.c index d34bc5492e8d..095443c63d8d 100644 --- a/common/spl/spl_legacy.c +++ b/common/spl/spl_legacy.c @@ -19,7 +19,7 @@ static void spl_parse_legacy_validate(uintptr_t start, uintptr_t size) { uintptr_t spl_start = (uintptr_t)_start; - uintptr_t spl_end = (uintptr_t)__bss_end; + uintptr_t spl_end = (uintptr_t)_image_binary_end; uintptr_t end = start + size;
if ((start >= spl_start && start < spl_end) ||