On platforms that use DM_PWM, we do not need to define this value anymore, so remove it from config files.
Signed-off-by: Tom Rini trini@konsulko.com --- For the record, vining_2000 does not use DM_PWM and requires board-specific updates as well to switch, so we're going this path for the moment. --- include/configs/aristainetos2.h | 2 -- include/configs/ge_b1x5v2.h | 3 --- include/configs/ge_bx50v3.h | 2 -- include/configs/mx53ppd.h | 3 --- 4 files changed, 10 deletions(-)
diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index c1eec5d06ccb..b1ec8ef269c6 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -424,8 +424,6 @@ /* check this console not needed, after test remove it */ #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_IMX6_PWM_PER_CLK 66000000 - #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \ "sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h index 97fe76cfa8ec..a8a6229f526f 100644 --- a/include/configs/ge_b1x5v2.h +++ b/include/configs/ge_b1x5v2.h @@ -12,9 +12,6 @@
#include "mx6_common.h"
-/* PWM */ -#define CONFIG_IMX6_PWM_PER_CLK 66000000 - /* UART */ #define CONFIG_MXC_UART_BASE UART3_BASE
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index cbaf03c2a226..705cb763a66d 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -106,6 +106,4 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_IMX6_PWM_PER_CLK 66000000 - #endif /* __GE_BX50V3_CONFIG_H */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 913bc1996d40..963dd92dd709 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -102,9 +102,6 @@
/* FLASH and environment organization */
-/* Backlight Control */ -#define CONFIG_IMX6_PWM_PER_CLK 66666000 - #define CONFIG_IMX_VIDEO_SKIP
#endif /* __CONFIG_H */