This commit adds some of command entries (CONFIG_CMD_*) to cover include/config_cmd_default.h and a little extra.
Because U-Boot supports lots of commands, they should be categorized according to their usage.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---
I know lots of commands are missing. Since I am not familiar with all the commands, volunteers are very very welcome.
- Please check if the added Kconfig options (prompt, help message, categorization) are reasonable.
- Please send patches to add more.
common/Kconfig | 283 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 274 insertions(+), 9 deletions(-)
diff --git a/common/Kconfig b/common/Kconfig index 7f8359d..fd84fa0 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -18,34 +18,299 @@ config SYS_HUSH_PARSER help Backward compatibility.
+comment "Commands" + +menu "Info commands" + +config CMD_BDI + bool "bdinfo" + help + Print board info + +config CMD_CONSOLE + bool "coninfo" + help + Print console devices and information. + +config CMD_LICENSE + bool "license" + help + Print GPL license text + +endmenu + +menu "Boot commands" + +config CMD_BOOTD + bool "bootd" + help + Run the command stored in the environment "bootcmd", i.e. + "bootd" does the same thing as "run bootcmd". + config CMD_BOOTM - bool "Enable bootm command" + bool "bootm" default y help Boot an application image from the memory.
-config CMD_CRC32 - bool "Enable crc32 command" +config CMD_GO + bool "go" default y help - Compute CRC32. + Start an application at a given address. + +config CMD_RUN + bool "run" + help + Run the command in the given environment variable. + +config CMD_IMI + bool "iminfo" + help + Print header information for application image. + +config CMD_IMLS + bool "imls" + help + List all images found in flash + +config CMD_XIMG + bool "imxtract" + help + Extract a part of a multi-image. + +endmenu + +menu "Environment commands"
config CMD_EXPORTENV - bool "Enable env export command" + bool "env export" default y help Export environments.
config CMD_IMPORTENV - bool "Enable env import command" + bool "env import" default y help Import environments.
-config CMD_GO - bool "Enable go command" +config CMD_EDITENV + bool "editenv" + help + Edit environment variable. + +config CMD_SAVEENV + bool "saveenv" + help + Run the command in the given environment variable. + +endmenu + +menu "Memory commands" + +config CMD_MEMORY + bool "md, mm, nm, mw, cp, cmp, base, loop" + help + Memeory commands. + md - memory display + mm - memory modify (auto-incrementing address) + nm - memory modify (constant address) + mw - memory write (fill) + cp - memory copy + cmp - memory compare + base - print or set address offset + loop - initinite loop on address range + +config CMD_CRC32 + bool "crc32" default y help - Start an application at a given address. + Compute CRC32. + +config LOOPW + bool "loopw" + help + Infinite write loop on address range + +config CMD_MEMTEST + bool "crc32" + help + Simple RAM read/write test. + +config CMD_MX_CYCLIC + bool "mdc, mwc" + help + mdc - memory display cyclic + mwc - memory write cyclic + +config CMD_MEMINFO + bool "meminfo" + help + Display memory information. + +endmenu + +menu "Device access commands" + +config CMD_LOADB + bool "loadb" + help + Load a binary file over serial line. + +config CMD_LOADS + bool "loads" + help + Load an S-Record file over serial line + +config CMD_FLASH + bool "flinfo, erase, protect" + help + NOR flash support. + flinfo - print FLASH memory information + erase - FLASH memory + protect - enable or disable FLASH write protection + +config CMD_NAND + bool "nand" + help + NAND support. + +config CMD_SPI + bool "sspi" + help + SPI utility command. + +config CMD_I2C + bool "i2c" + help + I2C support. + +config CMD_USB + bool "usb" + help + USB support. + +config CMD_FPGA + bool "fpga" + help + FPGA support. + +endmenu + + +menu "Shell scripting commands" + +config CMD_ECHO + bool "echo" + help + Echo args to console + +config CMD_ITEST + bool "itest" + help + Return true/false on integer compare. + +config CMD_SOURCE + bool "source" + help + Run script from memory + +endmenu + +menu "Network commands" + +config CMD_NET + bool "bootp, tftpboot" + help + Network commands. + bootp - boot image via network using BOOTP/TFTP protocol + tftpboot - boot image via network using TFTP protocol + +config CMD_TFTPPUT + bool "tftp put" + help + TFTP put command, for uploading files to a server + +config CMD_TFTPSRV + bool "tftpsrv" + help + Act as a TFTP server and boot the first received file + +config CMD_RARP + bool "rarpboot" + help + Boot image via network using RARP/TFTP protocol + +config CMD_DHCP + bool "dhcp" + help + Boot image via network using DHCP/TFTP protocol + +config CMD_NFS + bool "nfs" + help + Boot image via network using NFS protocol. + +config CMD_PING + bool "ping" + help + Send ICMP ECHO_REQUEST to network host + +config CMD_CDP + bool "cdp" + help + Perform CDP network configuration + +config CMD_SNTP + bool "sntp" + help + Synchronize RTC via network + +config CMD_DNS + bool "dns" + help + Lookup the IP of a hostname + +config CMD_DNS + bool "dns" + help + Lookup the IP of a hostname + +config CMD_LINK_LOCAL + bool "linklocal" + help + Acquire a network IP address using the link-local protocol + +endmenu + +menu "Misc commands" + +config CMD_TIME + bool "time" + help + Run commands and summarize execution time. + +# TODO: rename to CMD_SLEEP +config CMD_MISC + bool "sleep" + help + Delay execution for some time + +config CMD_TIMER + bool "timer" + help + Access the system timer. + +config CMD_SETGETDCR + bool "getdcr, setdcr, getidcr, setidcr" + depends on 4xx + help + getdcr - Get an AMCC PPC 4xx DCR's value + setdcr - Set an AMCC PPC 4xx DCR's value + getidcr - Get a register value via indirect DCR addressing + setidcr - Set a register value via indirect DCR addressing + +endmenu
endmenu