[U-Boot-Users] s3c2440 -- serial_init

Hi all

I am trying to port u-boot to a s3c2440 samsung processor.

I applied the smdk2440 boards patch (almost similar architecture) and trying to modify it for our board's requirement. But during the serial_init it goes to the _serial_putc and then after certain loops it goes to the hang function and hangs there.

What could be the problem? Or am I doing some wrong initializations?

Thanks in advance.

Tiju

Now you can chat without downloading messenger. Go to http://in.messenger.yahoo.com/webmessengerpromo.php