Every time a sata bus/port is scanned and a new device is detected, we want to call device_probe() as it will give us a chance to run additional post-processings for some purposes.
In particular, support for creating partitions on a device will be added.
Signed-off-by: AKASHI Takahiro takahiro.akashi@linaro.org Reviewed-by: Simon Glass sjg@chromium.org --- drivers/ata/dwc_ahsata.c | 5 +++++ drivers/ata/fsl_sata.c | 11 +++++++++++ drivers/ata/sata_mv.c | 5 +++++ drivers/ata/sata_sil.c | 12 ++++++++++++ 4 files changed, 33 insertions(+)
diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c index 6d42548087b3..d9fd850c6fae 100644 --- a/drivers/ata/dwc_ahsata.c +++ b/drivers/ata/dwc_ahsata.c @@ -1026,6 +1026,11 @@ int dwc_ahsata_scan(struct udevice *dev) return ret; }
+ ret = blk_probe_or_unbind(dev); + if (ret < 0) + /* TODO: undo create */ + return ret; + return 0; }
diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c index e44db0a37458..346e9298b4c5 100644 --- a/drivers/ata/fsl_sata.c +++ b/drivers/ata/fsl_sata.c @@ -982,6 +982,17 @@ static int fsl_ata_probe(struct udevice *dev) failed_number++; continue; } + + ret = device_probe(bdev); + if (ret < 0) { + debug("Can't probe\n"); + ret = fsl_unbind_device(blk); + if (ret) + return ret; + + failed_number++; + continue; + } }
if (failed_number == nr_ports) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 003222d47be6..60666d551434 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1099,6 +1099,11 @@ static int sata_mv_probe(struct udevice *dev) continue; }
+ ret = blk_probe_or_unbind(bdev); + if (ret < 0) + /* TODO: undo create */ + continue; + /* If we got here, the current SATA port was probed * successfully, so set the probe status to successful. */ diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index dda712f42cb2..295f7ca72303 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -864,6 +864,18 @@ static int sil_pci_probe(struct udevice *dev) failed_number++; continue; } + + ret = device_probe(bdev); + if (ret < 0) { + debug("Can't probe\n"); + ret = sil_unbind_device(blk); + device_unbind(bdev); + if (ret) + return ret; + + failed_number++; + continue; + } }
if (failed_number == sata_info.maxport)