These are my news
Hi all, I have this condition now when I do make zImage and make bootstrap (i link zImage at 0x00040000 after a simple bootloader) the system work and zImage decompress itself at 0x0C100000 when I make make uiImage of the same kernel and I execute it usinf u-bbot it doesn't work. There could be 2 reasons 1) address problem bootargs problem, but my kernel is built using BOOTCMD_OVERWRITE option.
Any ideas?
Thanks
On Monday 17 January 2011 19:24:14 Fabio Giovagnini wrote:
Ok, rigth. I'mm newbe of u-bbot and I'd loke to contribute. What could be the usefull info for you?
Thanks in advance
On Monday 17 January 2011 19:21:27 Wolfgang Denk wrote:
Dear Fabio Giovagnini,
In message 201101171908.02343.fabio.giovagnini@aurion-tech.com you
wrote:
Hi All this is what I do:
- I run u-Boot getting this output:
U-Boot 2010.12-09860-g9cb5761-dirty (Jan 17 2011 - 18:05:12)
CPU: SH2A BOARD: MLCD7203
This appears to be an out-of-tree port, i. e. code which is completely unknown to us.
Any ideas about why the kernelò do not send out anything?
We don't know your code, we don't know which exact commands you're running, we don't see your environment, we don't know nothing.
How could we then come up with helpful comments?
Best regards,
Wolfgang Denk