Add an option for SPL to add a devicetree to the passage bloblist, so SPL can provide the devicetree to U-Boot.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
common/Kconfig | 20 ++++++++++++++++++++ common/spl/spl.c | 44 ++++++++++++++++++++++++++++++++++++++++++-- include/spl.h | 2 ++ 3 files changed, 64 insertions(+), 2 deletions(-)
diff --git a/common/Kconfig b/common/Kconfig index 59783d66cb8..bf6bff22e71 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -881,6 +881,26 @@ config SPL_PASSAGE_IN firmware phases to communicate state and settings to following phases.
+config SPL_PASSAGE_OUT + bool "Support the standard-passage protocol in SPL (out)" + depends on SPL_BLOBLIST + default y if PASSAGE_IN + help + This enables a standard protocol for entering U-Boot, providing + parameters in a bloblist and a devicetree. It allows the various + firmware stages to communicate state and settings to following + stages. + +config SPL_PASSAGE_ADD_DTB + bool "Add devicetree to the outgoing passage" + depends on SPL_PASSAGE_OUT + default y if SPL_PASSAGE_OUT && !SPL_PASSAGE_IN + help + Add the devicetree into the bloblist in SPL (it is assumed to not + already be there) so that the next phase (U-Boot) can find it. + + This option should be enabled in the phase that sets up the passage. + source "common/spl/Kconfig"
config IMAGE_SIGN_INFO diff --git a/common/spl/spl.c b/common/spl/spl.c index d54356b6a28..be770d0226c 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -56,6 +56,11 @@ binman_sym_declare(ulong, spl, image_pos); binman_sym_declare(ulong, spl, size); #endif
+#if CONFIG_IS_ENABLED(PASSAGE_ADD_DTB) +binman_sym_declare(ulong, u_boot_dtb, image_pos); +binman_sym_declare(ulong, u_boot_dtb, size); +#endif + /* Define board data structure */ static struct bd_info bdata __attribute__ ((section(".data")));
@@ -406,7 +411,8 @@ static int setup_spl_handoff(void) { struct spl_handoff *ho;
- ho = bloblist_ensure(BLOBLISTT_U_BOOT_SPL_HANDOFF, sizeof(struct spl_handoff)); + ho = bloblist_ensure(BLOBLISTT_U_BOOT_SPL_HANDOFF, + sizeof(struct spl_handoff)); if (!ho) return -ENOENT;
@@ -423,7 +429,8 @@ static int write_spl_handoff(void) struct spl_handoff *ho; int ret;
- ho = bloblist_find(BLOBLISTT_U_BOOT_SPL_HANDOFF, sizeof(struct spl_handoff)); + ho = bloblist_find(BLOBLISTT_U_BOOT_SPL_HANDOFF, + sizeof(struct spl_handoff)); if (!ho) return -ENOENT; handoff_save_dram(ho); @@ -440,6 +447,33 @@ static inline int write_spl_handoff(void) { return 0; }
#endif /* HANDOFF */
+/** + * Write the devicetree for the next phase into the passage + * + * For now we assume the next phase is U-Boot proper + * + * @return 0 on success, -ENOSPC if it is missing and could not be added due to + * lack of space, or -ESPIPE it exists but has the wrong size + */ +static int passage_write_dtb(void) +{ +#if CONFIG_IS_ENABLED(PASSAGE_ADD_DTB) + ulong start = binman_sym(ulong, u_boot_dtb, image_pos); + ulong size = binman_sym(ulong, u_boot_dtb, size); + void *dtb; + int ret; + + log_debug("passage: Adding control dtb size %lx\n", size); + ret = bloblist_ensure_size(BLOBLISTT_CONTROL_DTB, size, 0, + (void **)&dtb); + if (ret) + return ret; + memcpy(dtb, map_sysmem(start, size), size); +#endif + + return 0; +} + /** * get_bootstage_id() - Get the bootstage ID to emit * @@ -761,6 +795,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2) printf(SPL_TPL_PROMPT "SPL hand-off write failed (err=%d)\n", ret); } + if (CONFIG_IS_ENABLED(PASSAGE_ADD_DTB)) { + ret = passage_write_dtb(); + if (ret) + printf(SPL_TPL_PROMPT + "Write DTB failed (err=%d)\n", ret); + } if (CONFIG_IS_ENABLED(BLOBLIST)) { ret = bloblist_finish(); if (ret) diff --git a/include/spl.h b/include/spl.h index a4d5cedad3a..472b171f5be 100644 --- a/include/spl.h +++ b/include/spl.h @@ -270,6 +270,8 @@ binman_sym_extern(ulong, u_boot_any, image_pos); binman_sym_extern(ulong, u_boot_any, size); binman_sym_extern(ulong, spl, image_pos); binman_sym_extern(ulong, spl, size); +binman_sym_extern(ulong, u_boot_dtb, image_pos); +binman_sym_extern(ulong, u_boot_dtb, size);
/** * spl_get_image_pos() - get the image position of the next phase