On 22/04/13 13:46, Mark Jackson wrote:
NanoBone Specification:
CPU: TI AM335x
Memory: 256MB DDR3 64MB NOR flash 256MB NAND flash 128KB FRAM
Ethernet: 2 x 10/100 connected to SMSC LAN8710 PHY
USB: 1 x USB2.0 Type A
I2C: 2Kbit EEPROM (Microchip 24AA02) RTC (Maxim DS1338) GPIO Expander (Microchip MCP23017)
Expansion connector: 6 x UART 1 x MMC/SD 1 x USB2.0
Signed-off-by: Mark Jackson mpfj@newflow.co.uk
Changes in v2:
- Tweaked after comments from Tom Rini
MAINTAINERS | 4 + board/newflow/nanobone/Makefile | 46 ++++++ board/newflow/nanobone/board.c | 304 +++++++++++++++++++++++++++++++++++++++ board/newflow/nanobone/board.h | 24 ++++ board/newflow/nanobone/mux.c | 203 ++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/nanobone.h | 285 ++++++++++++++++++++++++++++++++++++ 7 files changed, 867 insertions(+) create mode 100644 board/newflow/nanobone/Makefile create mode 100644 board/newflow/nanobone/board.c create mode 100644 board/newflow/nanobone/board.h create mode 100644 board/newflow/nanobone/mux.c create mode 100644 include/configs/nanobone.h
Any chance this board can be added ?
Regards Mark J.