The RTL8211C found on the A20-OlinuXino-Lime2 does not word in slave mode. This patch disables master/slave mode autonegotiation and forces master mode.
The RTL8211C identifies itself as RTL8211B via its UID. This patch uses the revision number taken from the PHYID2 register to distinguish the two. The NetBSD driver uses the same approach.
CC: fradav@gmail.com CC: merker@debian.org CC: hdegoede@redhat.com CC: ijc@hellion.org.uk CC: joe.hershberger@ni.com Signed-off-by: Michael Haas haas@computerlinguist.org ---
drivers/net/phy/realtek.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 259a87f..97d5712 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -54,6 +54,19 @@ static int rtl8211x_config(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER, MIIM_RTL8211x_PHY_INTR_DIS);
+ int reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_PHYSID1); + int rev = reg & 0xf; + if (rev == 3 && phydev->phy_id == 0x1cc912) { + /* RTL8211C and RTL8211C are distinguished only by + their revision number */ + reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000); + /* force manual master/slave configuration */ + reg |= (1 << 12); + /* force master mode */ + reg | = (1 << 11); + phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg); + } + /* read interrupt status just to clear it */ phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER);