Hi
As i have seen that the Xilinx support has entered master i just tried to boot it on a Xilinx Zynx Zedboard Rev. D. The build works with the xilinx git tree so i am pretty confident that its not some issues with bootgen or the embedded fpga image.
The board loads the fpga which can be seen by the blue "done" led of the ZedBoard. But then the LED turns off and about after a second or so it just lights up shortly again to turn off again. So it seems as if the board is somehow caught in a reboot loop. Any ideas what might be wrong?
I am building with: export PATH=~/xilinx/SDK/2013.3/gnu/arm/lin/bin:$PATH export CROSS_COMPILE=arm-xilinx-linux-gnueabi- make clean make distclean make zynq_zed_config make
The BOOT.BIN is build xilinx/SDK/2013.3/bin/lin64/bootgen -image u-boot.bif -w on -o BOOT.BIN
And u-boot.bif looks like that: the_ROM_image: { [bootloader]zynq_fsbl_0.elf system.bit u-boot.elf }
Best regards Tim