As K2 can directly boot U-Boot, add u-boot_HS_MLO as the secure image name for secure K2 devices, for all boot modes other than SPI flash.
Signed-off-by: Madan Srinivas madans@ti.com Signed-off-by: Andrew F. Davis afd@ti.com --- arch/arm/mach-omap2/config_secure.mk | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk index 0c843338d7..0346cb93ab 100644 --- a/arch/arm/mach-omap2/config_secure.mk +++ b/arch/arm/mach-omap2/config_secure.mk @@ -77,6 +77,12 @@ u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin FORCE u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin FORCE $(call if_changed,mkomapsecimg)
+# For supporting single stage boot on keystone, the image is a full u-boot +# file, not an SPL. This will work for all boot devices, other than SPI +# flash +u-boot_HS_MLO: $(obj)/u-boot.bin + $(call if_changed,mkomapsecimg) + # For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot # file, not an SPL. In this case the mkomapsecimg command looks for a # u-boot-HS_* prefix