Hi Lin,
On 07/12/2015 04:04, Lin Huang wrote:
From: Marek Vasut marex@denx.de
Using 50 MiB malloc pool in SPL is nonsense. Since the caches are not enabled in SPL, it takes 2 seconds to init the pool and has no obvious benefit. Reduce the size to 1 MiB.
Signed-off-by: Marek Vasut marex@denx.de Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Tested-by: Stefano Babic sbabic@denx.de Acked-by: Tim Harvey tharvey@gateworks.com
include/configs/imx6_spl.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 1744f2c..43ce7fe 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -63,15 +63,15 @@
#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL) #define CONFIG_SPL_BSS_START_ADDR 0x88200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_SPL_MALLOC_START 0x88300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */ +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_TEXT_BASE 0x87800000 #else #define CONFIG_SPL_BSS_START_ADDR 0x18200000 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_SPL_MALLOC_START 0x18300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */ +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_TEXT_BASE 0x17800000 #endif #endif
Marek's patch was already accepted and it is mainline. Which is the reason to post it again ?
Best regards, Stefano Babic