Re: [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART

Hi Yann,

On Fri, 5 Oct 2012 14:09:48 +0200, Yann Vernier yann.vernier@orsoc.se wrote:

CONFIG_BAUDRATE and KS8695_UART_LINEC_WLEN8 used for UART registers

arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S index e9f1227..1bba571 100644 --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S @@ -72,10 +72,10 @@ lowlevel_init: * enable UART for early debug trace */ ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)

• mov r2, #0xd9
• str r2, [r1] /* 115200 baud */

• mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
• str r2, [r1] ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)

• mov r2, #0x03

• mov r2, #KS8695_UART_LINEC_WLEN8 str r2, [r1] /* 8 data bits, no parity, 1 stop */ ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING) mov r2, #0x41

Applied to u-boot-arm/master, thanks!

Amicalement,