Instead of just shooting down the entry that covers CCSR, clear out every TLB entry that isn't the one that we're executing out of.
Signed-off-by: Scott Wood scottwood@freescale.com --- arch/powerpc/cpu/mpc85xx/start.S | 76 +++++++++++++++++++--------------- arch/powerpc/include/asm/mmu.h | 4 ++ arch/powerpc/include/asm/processor.h | 1 + 3 files changed, 48 insertions(+), 33 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 6aabc30..742eade 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -406,12 +406,11 @@ l2_disabled: * Search for the TLB that covers the code we're executing, and shrink it * so that it covers only this 4K page. That will ensure that any other * TLB we create won't interfere with it. We assume that the TLB exists, - * which is why we don't check the Valid bit of MAS1. + * which is why we don't check the Valid bit of MAS1. We also assume + * it is in TLB1. * * This is necessary, for example, when booting from the on-chip ROM, * which (oddly) creates a single 4GB TLB that covers CCSR and DDR. - * If we don't shrink this TLB now, then we'll accidentally delete it - * in "purge_old_ccsr_tlb" below. */ bl nexti /* Find our address */ nexti: mflr r1 /* R1 = our PC */ @@ -421,11 +420,15 @@ nexti: mflr r1 /* R1 = our PC */ msync tlbsx 0, r1 /* This must succeed */
+ mfspr r14, MAS0 /* Save ESEL for later */ + rlwinm r14, r14, 16, 0xfff + /* Set the size of the TLB to 4KB */ mfspr r3, MAS1 li r2, 0xF00 andc r3, r3, r2 /* Clear the TSIZE bits */ ori r3, r3, MAS1_TSIZE(BOOKE_PAGESZ_4K)@l + oris r3, r3, MAS1_IPROT@h mtspr MAS1, r3
/* @@ -452,6 +455,39 @@ nexti: mflr r1 /* R1 = our PC */ tlbwe
/* + * Clear out any other TLB entries that may exist, to avoid conflicts. + * Our TLB entry is in r14. + */ + li r0, TLBIVAX_ALL | TLBIVAX_TLB0 + tlbivax 0, r0 + tlbsync + + mfspr r4, SPRN_TLB1CFG + rlwinm r4, r4, 0, TLBnCFG_NENTRY_MASK + + li r3, 0 + mtspr MAS1, r3 +1: cmpw r3, r14 +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) + cmpwi cr1, r3, CONFIG_SYS_PPC_E500_DEBUG_TLB + cror cr0, cr0, cr1 +#endif + rlwinm r5, r3, 16, MAS0_ESEL_MSK + addi r3, r3, 1 + beq 1b /* skip the entry we're executing from */ + + oris r5, r5, MAS0_TLBSEL(1)@h + mtspr MAS0, r5 + + isync + tlbwe + isync + msync + + cmpw r3, r4 + blt 1b + +/* * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default * location is not where we want it. This typically happens on a 36-bit * system, where we want to move CCSR to near the top of 36-bit address space. @@ -469,41 +505,15 @@ nexti: mflr r1 /* R1 = our PC */ #error "CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW) must be defined." #endif
-purge_old_ccsr_tlb: - lis r8, CONFIG_SYS_CCSRBAR@h - ori r8, r8, CONFIG_SYS_CCSRBAR@l - lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h - ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l - - /* - * In a multi-stage boot (e.g. NAND boot), a previous stage may have - * created a TLB for CCSR, which will interfere with our relocation - * code. Since we're going to create a new TLB for CCSR anyway, - * it should be safe to delete this old TLB here. We have to search - * for it, though. - */ - - li r1, 0 - mtspr MAS6, r1 /* Search the current address space and PID */ - isync - msync - tlbsx 0, r8 - mfspr r1, MAS1 - andis. r2, r1, MAS1_VALID@h /* Check for the Valid bit */ - beq 1f /* Skip if no TLB found */ - - rlwinm r1, r1, 0, 1, 31 /* Clear Valid bit */ - mtspr MAS1, r1 - isync - msync - tlbwe -1: - create_ccsr_new_tlb: /* * Create a TLB for the new location of CCSR. Register R8 is reserved * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR). */ + lis r8, CONFIG_SYS_CCSRBAR@h + ori r8, r8, CONFIG_SYS_CCSRBAR@l + lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h + ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 209103e..2e0e292 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -475,6 +475,10 @@ extern void print_bats(void); #define BOOKE_PAGESZ_256GB 14 #define BOOKE_PAGESZ_1TB 15
+#define TLBIVAX_ALL 4 +#define TLBIVAX_TLB0 0 +#define TLBIVAX_TLB1 8 + #ifdef CONFIG_E500 #ifndef __ASSEMBLY__ extern void set_tlb(u8 tlb, u32 epn, u64 rpn, diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index dc009d6..0de3685 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -513,6 +513,7 @@
#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ #define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ +#define TLBnCFG_NENTRY_MASK 0x00000fff #define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ #define SPRN_TLB1PS 0x159 /* TLB 1 Page Size Register */ #define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */