On Thu, May 23, 2019 at 2:11 PM Adam Ford aford173@gmail.com wrote:
Currently, when the spl_boot_device checks the boot device, it will only return MMC1 when it's either sd or eMMC regardless of whether or not it's MMC1 or MMC2. This is a problem when booting from MMC2 if MMC isn't being manually configured like in the DM_SPL case with SPL_OF_CONTROL.
This patch will check the register and return either MMC1 or MMC2.
Signed-off-by: Adam Ford aford173@gmail.com
Stefano, Since the release was just cut, is there any way this can be applied?
adam
diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c index 9f1e0f6a72..1f230aca33 100644 --- a/arch/arm/mach-imx/spl.c +++ b/arch/arm/mach-imx/spl.c @@ -24,6 +24,7 @@ u32 spl_boot_device(void) { unsigned int bmode = readl(&src_base->sbmr2); u32 reg = imx6_src_get_boot_mode();
u32 mmc_index = ((reg >> 11) & 0x03); /* * Check for BMODE if serial downloader is enabled@@ -84,11 +85,12 @@ u32 spl_boot_device(void) /* SD/eSD: 8.5.3, Table 8-15 */ case IMX6_BMODE_SD: case IMX6_BMODE_ESD:
return BOOT_DEVICE_MMC1;/* MMC/eMMC: 8.5.3 */ case IMX6_BMODE_MMC: case IMX6_BMODE_EMMC:return BOOT_DEVICE_MMC1;
if (mmc_index == 1)return BOOT_DEVICE_MMC2;elsereturn BOOT_DEVICE_MMC1; /* NAND Flash: 8.5.2, Table 8-10 */ case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX: return BOOT_DEVICE_NAND;-- 2.17.1