This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it.
Cc: Chris Packham judge.packham@gmail.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/dts/Makefile | 2 - arch/arm/dts/kirkwood-db-88f6281-spi.dts | 48 --------- arch/arm/dts/kirkwood-db-88f6281.dts | 26 ----- arch/arm/dts/kirkwood-db.dtsi | 94 ----------------- arch/arm/mach-kirkwood/Kconfig | 4 - board/Marvell/db-88f6281-bp/.gitignore | 1 - board/Marvell/db-88f6281-bp/Kconfig | 12 --- board/Marvell/db-88f6281-bp/MAINTAINERS | 10 -- board/Marvell/db-88f6281-bp/Makefile | 12 --- board/Marvell/db-88f6281-bp/db-88f6281-bp.c | 106 -------------------- board/Marvell/db-88f6281-bp/kwbimage.cfg.in | 36 ------- configs/db-88f6281-bp-nand_defconfig | 64 ------------ configs/db-88f6281-bp-spi_defconfig | 63 ------------ include/configs/db-88f6281-bp.h | 83 --------------- 14 files changed, 561 deletions(-) delete mode 100644 arch/arm/dts/kirkwood-db-88f6281-spi.dts delete mode 100644 arch/arm/dts/kirkwood-db-88f6281.dts delete mode 100644 arch/arm/dts/kirkwood-db.dtsi delete mode 100644 board/Marvell/db-88f6281-bp/.gitignore delete mode 100644 board/Marvell/db-88f6281-bp/Kconfig delete mode 100644 board/Marvell/db-88f6281-bp/MAINTAINERS delete mode 100644 board/Marvell/db-88f6281-bp/Makefile delete mode 100644 board/Marvell/db-88f6281-bp/db-88f6281-bp.c delete mode 100644 board/Marvell/db-88f6281-bp/kwbimage.cfg.in delete mode 100644 configs/db-88f6281-bp-nand_defconfig delete mode 100644 configs/db-88f6281-bp-spi_defconfig delete mode 100644 include/configs/db-88f6281-bp.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f0944b7590cf..cbaa9f29c1b5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -39,8 +39,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ kirkwood-atl-sbx81lifxcat.dtb \ kirkwood-blackarmor-nas220.dtb \ kirkwood-d2net.dtb \ - kirkwood-db-88f6281.dtb \ - kirkwood-db-88f6281-spi.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ diff --git a/arch/arm/dts/kirkwood-db-88f6281-spi.dts b/arch/arm/dts/kirkwood-db-88f6281-spi.dts deleted file mode 100644 index 50b1b0d4a535..000000000000 --- a/arch/arm/dts/kirkwood-db-88f6281-spi.dts +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell DB-88F6281-BP Development Board Setup - * - * Saeed Bishara saeed@marvell.com - * Thomas Petazzoni thomas.petazzoni@free-electrons.com - * - */ - -/dts-v1/; - -#include "kirkwood-db-88f6281.dts" - -/ { - aliases { - spi0 = &spi0; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor", "spi-flash"; - reg = <0>; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@u-boot { - reg = <0x00000000 0x00c00000>; - label = "u-boot"; - }; - partition@u-boot-env { - reg = <0x00c00000 0x00040000>; - label = "u-boot-env"; - }; - partition@unused { - reg = <0x00100000 0x00f00000>; - label = "unused"; - }; - }; -}; - -&nand { - status = "disabled"; -}; diff --git a/arch/arm/dts/kirkwood-db-88f6281.dts b/arch/arm/dts/kirkwood-db-88f6281.dts deleted file mode 100644 index 2adb17c955aa..000000000000 --- a/arch/arm/dts/kirkwood-db-88f6281.dts +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell DB-88F6281-BP Development Board Setup - * - * Saeed Bishara saeed@marvell.com - * Thomas Petazzoni thomas.petazzoni@free-electrons.com - * - */ - -/dts-v1/; - -#include "kirkwood-db.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Marvell DB-88F6281-BP Development Board"; - compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-db.dtsi b/arch/arm/dts/kirkwood-db.dtsi deleted file mode 100644 index b81d8e8298a3..000000000000 --- a/arch/arm/dts/kirkwood-db.dtsi +++ /dev/null @@ -1,94 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell DB-{88F6281,88F6282}-BP Development Board Setup - * - * Saeed Bishara saeed@marvell.com - * Thomas Petazzoni thomas.petazzoni@free-electrons.com - * - * This file contains the definitions that are common between the 6281 - * and 6282 variants of the Marvell Kirkwood Development Board. - */ - -#include "kirkwood.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - aliases { - ethernet0 = ð0; - spi0 = &spi0; - }; - - ocp@f1000000 { - pin-controller@10000 { - pmx_sdio_gpios: pmx-sdio-gpios { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - nr-ports = <2>; - status = "okay"; - }; - - ehci@50000 { - status = "okay"; - }; - - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio_gpios>; - pinctrl-names = "default"; - wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - }; -}; - -&nand { - chip-delay = <25>; - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x500000 0x1fb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 1d2ba886dd1a..546a3fc00fdc 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -56,9 +56,6 @@ config TARGET_SBx81LIFKW config TARGET_SBx81LIFXCAT bool "Allied Telesis SBx81GP24/SBx81GT24"
-config TARGET_DB_88F6281_BP - bool "Marvell DB-88F6281-BP" - endchoice
config SYS_SOC @@ -81,6 +78,5 @@ source "board/Seagate/nas220/Kconfig" source "board/zyxel/nsa310s/Kconfig" source "board/alliedtelesis/SBx81LIFKW/Kconfig" source "board/alliedtelesis/SBx81LIFXCAT/Kconfig" -source "board/Marvell/db-88f6281-bp/Kconfig"
endif diff --git a/board/Marvell/db-88f6281-bp/.gitignore b/board/Marvell/db-88f6281-bp/.gitignore deleted file mode 100644 index 775b9346b859..000000000000 --- a/board/Marvell/db-88f6281-bp/.gitignore +++ /dev/null @@ -1 +0,0 @@ -kwbimage.cfg diff --git a/board/Marvell/db-88f6281-bp/Kconfig b/board/Marvell/db-88f6281-bp/Kconfig deleted file mode 100644 index 38467399e688..000000000000 --- a/board/Marvell/db-88f6281-bp/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DB_88F6281_BP - -config SYS_BOARD - default "db-88f6281-bp" - -config SYS_VENDOR - default "Marvell" - -config SYS_CONFIG_NAME - default "db-88f6281-bp" - -endif diff --git a/board/Marvell/db-88f6281-bp/MAINTAINERS b/board/Marvell/db-88f6281-bp/MAINTAINERS deleted file mode 100644 index acf0b051ff54..000000000000 --- a/board/Marvell/db-88f6281-bp/MAINTAINERS +++ /dev/null @@ -1,10 +0,0 @@ -DB_88F6820_AMC BOARD -M: Chris Packham judge.packham@gmail.com -S: Maintained -F: arch/arm/dts/kirkwood-db-88f6281.dts -F: arch/arm/dts/kirkwood-db-88f6281-spi.dts -F: arch/arm/dts/kirkwood-db.dtsi -F: board/Marvell/db-88f6281-bp/ -F: include/configs/db-88f6281-bp.h -F: configs/db-88f6281-bp-nand_defconfig -F: configs/db-88f6281-bp-spi_defconfig diff --git a/board/Marvell/db-88f6281-bp/Makefile b/board/Marvell/db-88f6281-bp/Makefile deleted file mode 100644 index 003e9f66d18f..000000000000 --- a/board/Marvell/db-88f6281-bp/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := db-88f6281-bp.o -extra-y := kwbimage.cfg - -quiet_cmd_sed = SED $@ - cmd_sed = sed $(SEDFLAGS_$(@F)) $< >$(dir $@)$(@F) - -SEDFLAGS_kwbimage.cfg = -e "s/^#@BOOT_FROM.*/BOOT_FROM $(if $(CONFIG_CMD_NAND),nand,spi)/" -$(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ - include/config/auto.conf - $(call if_changed,sed) diff --git a/board/Marvell/db-88f6281-bp/db-88f6281-bp.c b/board/Marvell/db-88f6281-bp/db-88f6281-bp.c deleted file mode 100644 index 62027bd6385e..000000000000 --- a/board/Marvell/db-88f6281-bp/db-88f6281-bp.c +++ /dev/null @@ -1,106 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ - -#include <common.h> -#include <init.h> -#include <net.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <miiphy.h> -#include <netdev.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/arch/gpio.h> - -#define DB_88F6281_OE_LOW ~(BIT(7)) -#define DB_88F6281_OE_HIGH ~(BIT(15) | BIT(14) | BIT(13) | BIT(4)) -#define DB_88F6281_OE_VAL_LOW BIT(7) -#define DB_88F6281_OE_VAL_HIGH 0 - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - mvebu_config_gpio(DB_88F6281_OE_VAL_LOW, - DB_88F6281_OE_VAL_HIGH, - DB_88F6281_OE_LOW, DB_88F6281_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { -#ifdef CONFIG_CMD_NAND - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, -#else - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, -#endif - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, - MPP23_GPIO, - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, - MPP27_GPIO, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, - MPP35_GPIO, - MPP36_GPIO, - MPP37_GPIO, - MPP38_GPIO, - MPP39_GPIO, - MPP40_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -/* automatically defined by kirkwood config.h */ -void reset_phy(void) -{ -} -#endif diff --git a/board/Marvell/db-88f6281-bp/kwbimage.cfg.in b/board/Marvell/db-88f6281-bp/kwbimage.cfg.in deleted file mode 100644 index 05f8b275f607..000000000000 --- a/board/Marvell/db-88f6281-bp/kwbimage.cfg.in +++ /dev/null @@ -1,36 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -# Boot Media configurations -#@BOOT_FROM - -DATA 0xd00100e0 0x1b1b1b9b -DATA 0xd0020134 0xbbbbbbbb -DATA 0xd0020138 0x00bbbbbb -DATA 0xd0020154 0x00000200 -DATA 0xd002014c 0x00001c00 -DATA 0xd0020148 0x00000001 - -DATA 0xd0001400 0x43000c30 -DATA 0xd0001404 0x39543000 -DATA 0xd0001408 0x22125451 -DATA 0xd000140c 0x00000833 -DATA 0xd0001410 0x000000cc -DATA 0xd0001414 0x00000000 -DATA 0xd0001418 0x00000000 -DATA 0xd000141c 0x00000c52 -DATA 0xd0001420 0x00000044 -DATA 0xd0001424 0x0000f1ff -DATA 0xd0001428 0x00085520 -DATA 0xd000147c 0x00008552 -DATA 0xd0001504 0x0ffffff1 -DATA 0xd0001508 0x10000000 -DATA 0xd000150c 0x0ffffff5 -DATA 0xd0001514 0x00000000 -DATA 0xd000151c 0x00000000 -DATA 0xd0001494 0x84210000 -DATA 0xd0001498 0x00000000 -DATA 0xd000149c 0x0000f40f -DATA 0xd0001480 0x00000001 - -# End of Header extension -DATA 0x0 0x0 diff --git a/configs/db-88f6281-bp-nand_defconfig b/configs/db-88f6281-bp-nand_defconfig deleted file mode 100644 index 4fff3269aff1..000000000000 --- a/configs/db-88f6281-bp-nand_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_TARGET_DB_88F6281_BP=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP" -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281" -# CONFIG_SYS_MALLOC_F is not set -CONFIG_BOOTDELAY=3 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_DM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_IDE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)" -CONFIG_ISO_PARTITION=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_NETCONSOLE=y -CONFIG_DM=y -CONFIG_MVSATA_IDE=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHY_MARVELL=y -CONFIG_DM_ETH=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_DM_RTC=y -CONFIG_RTC_MV=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_LZMA=y -CONFIG_LZO=y diff --git a/configs/db-88f6281-bp-spi_defconfig b/configs/db-88f6281-bp-spi_defconfig deleted file mode 100644 index 07e9db7f41b2..000000000000 --- a/configs/db-88f6281-bp-spi_defconfig +++ /dev/null @@ -1,63 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_TARGET_DB_88F6281_BP=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP" -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281-spi" -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT=y -CONFIG_BOOTDELAY=3 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_DM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_IDE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)" -CONFIG_ISO_PARTITION=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_NETCONSOLE=y -CONFIG_DM=y -CONFIG_MVSATA_IDE=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHY_MARVELL=y -CONFIG_DM_ETH=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_DM_RTC=y -CONFIG_RTC_MV=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_LZMA=y -CONFIG_LZO=y diff --git a/include/configs/db-88f6281-bp.h b/include/configs/db-88f6281-bp.h deleted file mode 100644 index 06a7091be208..000000000000 --- a/include/configs/db-88f6281-bp.h +++ /dev/null @@ -1,83 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ - -#ifndef _CONFIG_DB_88F6281_BP_H -#define _CONFIG_DB_88F6281_BP_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_SYS_TCLK 166666667 -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - -/* additions for new ARM relocation support */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_GPIO 1 - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * Environment variables configurations - */ -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ -#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE - -/* - * U-Boot bootcode configuration - */ - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ - -/* size in bytes reserved for initial data */ - -#include <asm/arch/config.h> -/* There is no PHY directly connected so don't ask it for link status */ -#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -/* - * Other required minimal configurations - */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ - -/* - * SDIO/MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MVEBU_MMC -#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE -#endif /* CONFIG_CMD_MMC */ - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ - -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */ - -#endif /* _CONFIG_DB_88F6281_BP_H */