From: Marek Behún marek.behun@nic.cz
Use the preferred if (IS_ENABLED(X)) instead of #ifdef X where possible.
There are still places where this is not possible or is more complicated to convert in this file. Leave those be for now.
Signed-off-by: Marek Behún marek.behun@nic.cz --- arch/arm/mach-mvebu/spl.c | 43 ++++++++++++++++----------------------- 1 file changed, 18 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index 97d7aea179..7dbe8eeba3 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -150,26 +150,24 @@ int spl_parse_board_header(struct spl_image_info *spl_image, return -EINVAL; }
-#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT - if (bootdev->boot_device == BOOT_DEVICE_SPI && + if (IS_ENABLED(CONFIG_SPL_SPI_FLASH_SUPPORT) && + bootdev->boot_device == BOOT_DEVICE_SPI && mhdr->blockid != IBR_HDR_SPI_ID) { printf("ERROR: Wrong blockid (%u) in SPI kwbimage\n", mhdr->blockid); return -EINVAL; } -#endif
-#ifdef CONFIG_SPL_SATA - if (bootdev->boot_device == BOOT_DEVICE_SATA && + if (IS_ENABLED(CONFIG_SPL_SATA) && + bootdev->boot_device == BOOT_DEVICE_SATA && mhdr->blockid != IBR_HDR_SATA_ID) { printf("ERROR: Wrong blockid (%u) in SATA kwbimage\n", mhdr->blockid); return -EINVAL; } -#endif
-#ifdef CONFIG_SPL_MMC - if ((bootdev->boot_device == BOOT_DEVICE_MMC1 || + if (IS_ENABLED(CONFIG_SPL_MMC) && + (bootdev->boot_device == BOOT_DEVICE_MMC1 || bootdev->boot_device == BOOT_DEVICE_MMC2 || bootdev->boot_device == BOOT_DEVICE_MMC2_2) && mhdr->blockid != IBR_HDR_SDIO_ID) { @@ -177,18 +175,16 @@ int spl_parse_board_header(struct spl_image_info *spl_image, mhdr->blockid); return -EINVAL; } -#endif
spl_image->offset = mhdr->srcaddr;
-#ifdef CONFIG_SPL_SATA /* * For SATA srcaddr is specified in number of sectors. * The main header is must be stored at sector number 1. * This expects that sector size is 512 bytes and recalculates * data offset to bytes relative to the main header. */ - if (mhdr->blockid == IBR_HDR_SATA_ID) { + if (IS_ENABLED(CONFIG_SPL_SATA) && mhdr->blockid == IBR_HDR_SATA_ID) { if (spl_image->offset < 1) { printf("ERROR: Wrong SATA srcaddr (%u) in kwbimage\n", spl_image->offset); @@ -197,17 +193,14 @@ int spl_parse_board_header(struct spl_image_info *spl_image, spl_image->offset -= 1; spl_image->offset *= 512; } -#endif
-#ifdef CONFIG_SPL_MMC /* * For SDIO (eMMC) srcaddr is specified in number of sectors. * This expects that sector size is 512 bytes and recalculates * data offset to bytes. */ - if (mhdr->blockid == IBR_HDR_SDIO_ID) + if (IS_ENABLED(CONFIG_SPL_MMC) && mhdr->blockid == IBR_HDR_SDIO_ID) spl_image->offset *= 512; -#endif
if (spl_image->offset % 4 != 0) { printf("ERROR: Wrong srcaddr (%u) in kwbimage\n", @@ -340,17 +333,17 @@ void board_init_f(ulong dummy) timer_init();
/* Armada 375 does not support SerDes and DDR3 init yet */ -#if !defined(CONFIG_ARMADA_375) - /* First init the serdes PHY's */ - serdes_phy_config(); - - /* Setup DDR */ - ret = ddr3_init(); - if (ret) { - debug("ddr3_init() failed: %d\n", ret); - hang(); + if (!IS_ENABLED(CONFIG_ARMADA_375)) { + /* First init the serdes PHY's */ + serdes_phy_config(); + + /* Setup DDR */ + ret = ddr3_init(); + if (ret) { + debug("ddr3_init() failed: %d\n", ret); + hang(); + } } -#endif
/* Initialize Auto Voltage Scaling */ mv_avs_init();