Add GPIO name lookup so that you can act on GPIO's by name vs controller id:
Before: u-boot=> gpio input pci_wdis# GPIO: 'pci_wdis#' not found Command 'gpio' failed: Error -22
After: u-boot=> gpio input pci_wdis# gpio: pin pci_wdis# (gpio 103) value is 1
Signed-off-by: Tim Harvey tharvey@gateworks.com --- configs/imx8mm_venice_defconfig | 1 + configs/imx8mn_venice_defconfig | 1 + configs/imx8mp_venice_defconfig | 1 + 3 files changed, 3 insertions(+)
diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index db2da79ab109..a55e0cd76b54 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -88,6 +88,7 @@ CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y CONFIG_CLK_IMX8MM=y CONFIG_GPIO_HOG=y +CONFIG_DM_GPIO_LOOKUP_LABEL=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_LED=y diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig index e9cb26495075..4709ecace65c 100644 --- a/configs/imx8mn_venice_defconfig +++ b/configs/imx8mn_venice_defconfig @@ -89,6 +89,7 @@ CONFIG_SPL_DM=y CONFIG_SPL_CLK_IMX8MN=y CONFIG_CLK_IMX8MN=y CONFIG_GPIO_HOG=y +CONFIG_DM_GPIO_LOOKUP_LABEL=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_LED=y diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig index 4d0432078d56..6b6a15588cd4 100644 --- a/configs/imx8mp_venice_defconfig +++ b/configs/imx8mp_venice_defconfig @@ -86,6 +86,7 @@ CONFIG_SPL_DM=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_CLK_IMX8MP=y CONFIG_GPIO_HOG=y +CONFIG_DM_GPIO_LOOKUP_LABEL=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_LED=y