On Tue, Jan 29, 2013 at 03:51:22PM -0800, Allen Martin wrote:
This series updates the tegra20 SPI driver to add fdt support and adds a new tegra30 SPI driver.
Testing was done on trimslice (tegra20) and cardhu (tegra30).
Tom, this series applies cleanly on top of your T114 series.
Changes in v4: -Added support for fdt aliases to slink driver -Check "status" field of fdt node to make sure node is enabled Changes in v3: -Dropped some fdt patches from the series that were picked up in u-boot-tegra/next already -Removed SPI node from seaboard, added to trimslice -Incorporated feedback from Simon Glass and Stephen Warren to slink driver Changes in v2: -Added new patch to sort dts files prior to adding new nodes -Moved "max-spi-frequency" out to board dts files -Moved tegra20 SFLASH fdt changes out to separate patch -Added valid flag to slink driver controller structure
Allen Martin (7): tegra20: fdt: add SPI SFLASH node tegra: spi: add fdt support to tegra SPI SFLASH driver tegra30: add SBC1 to periph id mapping table tegra30: fdt: add SPI SLINK nodes tegra: add addresses of SPI SLINK controllers tegra: add SPI SLINK driver tegra: cardhu: config: enable SPI
arch/arm/cpu/tegra30-common/clock.c | 2 +- arch/arm/dts/tegra20.dtsi | 12 + arch/arm/dts/tegra30.dtsi | 72 ++++++ arch/arm/include/asm/arch-tegra/tegra.h | 6 + arch/arm/include/asm/arch-tegra/tegra_slink.h | 84 ++++++ board/compulab/dts/tegra20-trimslice.dts | 5 + board/nvidia/common/board.c | 3 +- board/nvidia/dts/tegra30-cardhu.dts | 5 + drivers/spi/Makefile | 1 + drivers/spi/tegra_slink.c | 343 +++++++++++++++++++++++++ drivers/spi/tegra_spi.c | 45 +++- include/configs/cardhu.h | 11 + include/fdtdec.h | 2 + lib/fdtdec.c | 2 + 14 files changed, 589 insertions(+), 4 deletions(-) create mode 100644 arch/arm/include/asm/arch-tegra/tegra_slink.h create mode 100644 drivers/spi/tegra_slink.c
-- 1.7.10.4
-Allen