Select the correct USB product id used by the download gadget for ST stm32mp1 boards.
The board stm32mp1 select the correct product id, as defined in http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM): - dfu = 0xdf11 : STM Device in DFU mode it is the value used by ROM code and reused for stm32prog command - fasboot = 0x0afb : Android Fastboot device - others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device it is used for UMS command / usb_dnl_ums
This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID).
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com ---
board/st/stm32mp1/stm32mp1.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 18f9b84876..126af30173 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -233,6 +233,23 @@ int g_dnl_board_usb_cable_connected(void)
return dwc2_udc_B_session_valid(dwc2_udc_otg); } + +#define STM32MP1_G_DNL_DFU_PRODUCT_NUM 0xdf11 +#define STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM 0x0afb + +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) +{ + if (!strcmp(name, "usb_dnl_dfu")) + put_unaligned(STM32MP1_G_DNL_DFU_PRODUCT_NUM, &dev->idProduct); + else if (!strcmp(name, "usb_dnl_fastboot")) + put_unaligned(STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM, + &dev->idProduct); + else + put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM, &dev->idProduct); + + return 0; +} + #endif /* CONFIG_USB_GADGET */
#ifdef CONFIG_LED