On Friday 19 June 2015 04:45 PM, Mugunthan V N wrote:
Ethernet on DRA72x EVM is not working as the io delay calibration value is not correct. Fixing this with the correct values and verified this on DRA72x EVM with tftp file transfer
Yeah, I missed this. Thanks for the patch.
Tested this on DRA72-evm. Tested-by: Lokesh Vutla lokeshvutla@ti.com
Thanks and regards, Lokesh
Cc: Nishanth Menon nm@ti.com Cc: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: Mugunthan V N mugunthanvnm@ti.com
board/ti/dra7xx/mux_data.h | 48 +++++++++++++++++++++++----------------------- 1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index c9301a5..0ca3c51 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -156,30 +156,30 @@ const struct pad_conf_entry early_padconf[] = {
#ifdef CONFIG_IODELAY_RECALIBRATION const struct iodelay_cfg_entry iodelay_cfg_array[] = {
- {0x6F0, 480, 0}, /* RGMMI0_RXC_IN */
- {0x6FC, 111, 1641}, /* RGMMI0_RXCTL_IN */
- {0x708, 272, 1116}, /* RGMMI0_RXD0_IN */
- {0x714, 243, 1260}, /* RGMMI0_RXD1_IN */
- {0x720, 0, 1614}, /* RGMMI0_RXD2_IN */
- {0x72C, 105, 1673}, /* RGMMI0_RXD3_IN */
- {0x740, 531, 120}, /* RGMMI0_TXC_OUT */
- {0x74C, 11, 60}, /* RGMMI0_TXCTL_OUT */
- {0x758, 7, 120}, /* RGMMI0_TXD0_OUT */
- {0x764, 0, 0}, /* RGMMI0_TXD1_OUT */
- {0x770, 276, 120}, /* RGMMI0_TXD2_OUT */
- {0x77C, 440, 120}, /* RGMMI0_TXD3_OUT */
- {0xAB0, 702, 0}, /* CFG_VIN2A_D18_IN */
- {0xABC, 136, 976}, /* CFG_VIN2A_D19_IN */
- {0xAD4, 210, 1357}, /* CFG_VIN2A_D20_IN */
- {0xAE0, 189, 1462}, /* CFG_VIN2A_D21_IN */
- {0xAEC, 232, 1278}, /* CFG_VIN2A_D22_IN */
- {0xAF8, 0, 1397}, /* CFG_VIN2A_D23_IN */
- {0xA70, 1551, 115}, /* CFG_VIN2A_D12_OUT */
- {0xA7C, 816, 0}, /* CFG_VIN2A_D13_OUT */
- {0xA88, 876, 0}, /* CFG_VIN2A_D14_OUT */
- {0xA94, 312, 0}, /* CFG_VIN2A_D15_OUT */
- {0xAA0, 58, 0}, /* CFG_VIN2A_D16_OUT */
- {0xAAC, 0, 0}, /* CFG_VIN2A_D17_OUT */
- {0x6F0, 359, 0}, /* RGMMI0_RXC_IN */
- {0x6FC, 129, 1896}, /* RGMMI0_RXCTL_IN */
- {0x708, 80, 1391}, /* RGMMI0_RXD0_IN */
- {0x714, 196, 1522}, /* RGMMI0_RXD1_IN */
- {0x720, 40, 1860}, /* RGMMI0_RXD2_IN */
- {0x72C, 0, 1956}, /* RGMMI0_RXD3_IN */
- {0x740, 0, 220}, /* RGMMI0_TXC_OUT */
- {0x74C, 1820, 180}, /* RGMMI0_TXCTL_OUT */
- {0x758, 1740, 440}, /* RGMMI0_TXD0_OUT */
- {0x764, 1740, 240}, /* RGMMI0_TXD1_OUT */
- {0x770, 1680, 380}, /* RGMMI0_TXD2_OUT */
- {0x77C, 1740, 440}, /* RGMMI0_TXD3_OUT */
- {0xAB0, 596, 0}, /* CFG_VIN2A_D18_IN */
- {0xABC, 314, 980}, /* CFG_VIN2A_D19_IN */
- {0xAD4, 241, 1536}, /* CFG_VIN2A_D20_IN */
- {0xAE0, 103, 1689}, /* CFG_VIN2A_D21_IN */
- {0xAEC, 161, 1563}, /* CFG_VIN2A_D22_IN */
- {0xAF8, 0, 1613}, /* CFG_VIN2A_D23_IN */
- {0xA70, 0, 200}, /* CFG_VIN2A_D12_OUT */
- {0xA7C, 1560, 140}, /* CFG_VIN2A_D13_OUT */
- {0xA88, 1700, 0}, /* CFG_VIN2A_D14_OUT */
- {0xA94, 1260, 0}, /* CFG_VIN2A_D15_OUT */
- {0xAA0, 1400, 0}, /* CFG_VIN2A_D16_OUT */
- {0xAAC, 1290, 0}, /* CFG_VIN2A_D17_OUT */
}; #endif