Re: [U-Boot] Extract RSA Keys from image

26 Feb 2019

      On Tue, Feb 19, 2019 at 9:31 AM Jeridiah.Welti@bench.com wrote:
...
I am working on an application needing the ability to update to a verified
image from the running kernel/application.
We can follow the "normal" verified image boot sequence, where the chain
of trust is verified from U-Boot to image to execution, etc, but unsure how
to verify a new image after already running.
Is there a way to extract the public key hash from the U-Boot image so
that we can compute a hash on an upgrade image and verify a match?  Either
an existing tool, or some means that is accessibly from a Linux kernel that
we could use to grab this information.
I've done a lot of googling, and I have not seen any means to get to this
once the image is already booted and running.
Thank you for any guidance you can provide for this.
Jeridiah Welti
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
I'll take a stab at answering this since I recently went through
implementing verified boot.  The public key data used to verify the boot
images isn't passed on for use inside those images.  However it would be
possible to get them.  The public key is usually stored in the device tree
of the object doing the verification (SPL or u-boot).  This device tree is
stored as an object inside the FIT boot image.  The FIT boot image is
simply another device tree which contains configuration, device trees and
binary executables.
Within a running Linux image, you could read the u-boot FIT image (or SPL
FIT image if CONFIG_SPL_FIT_SIGNATURE is used) from wherever it's stored.
Use dtc tools to find the traverse to the /images/fdt-1/data object.  This
data object is the device tree containing the public key that u-boot used
to verify the kernel (or in case of SPL, this is the public key used to
verify u-boot).  Use dtc tools again to decode the device tree blob and
traverse to /signature/[signature name].  This node will have your public
key in the format:
        key-somekeyname {
                required = "image";
                algo = "sha256,rsa2048";
                rsa,r-squared = <0x1874a2f....>;
                rsa,modulus = <0x4a7b31eb....>;
                rsa,exponent = <0x0 0x10001>;
                rsa,n0-inverse = <0x93a4cd16>;
                rsa,num-bits = <0x800>;
                key-name-hint = "somekeyname";
        };
-Doug
-- 

This email and any attachments are for the exclusive use of the 
intended recipient(s) and may contain confidential and/or privileged 
information.  Inadvertent disclosure of this message does not constitute a 
waiver of any privilege, right or remedy.  If you are not the intended 
recipient, please do not directly or indirectly use, disclose or distribute 
this message, and please contact the sender and delete this email, any 
attachments and all copies.  Climate and its affiliates may use, read or 
archive email communications (including attachments) through its computer 
network, as permitted by applicable law.  Climate and its affiliates (or an 
external service provider) may also scan emails and attachments on its 
computer network to ensure systems operate efficiently and to minimize 
security risks. Thank you.

Re: [U-Boot] Extract RSA Keys from image

Douglas Zobel