Add another mux option for PWM5 pins, this is used on DH electronics STM32MP13xx DHCOR DHSBC board.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com Cc: u-boot@dh-electronics.com Cc: uboot-stm32@st-md-mailman.stormreply.com --- arch/arm/dts/stm32mp13-pinctrl.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi index b58bf6c0024..d19408f19f9 100644 --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi @@ -245,6 +245,21 @@ }; };
+ pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */ + }; + }; + pwm8_pins_a: pwm8-0 { pins { pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */