From: Gerard Salvatella gerard.salvatella@toradex.com
RGMII_RD1 pin (active high, GPIO6_IO27) is triggered on reboot during the SPL phase. This asserts (active low) nReset_Out from the PMIC. Only V1.1 and later Colibri iMX6 modules implement this in hw. Previous versions do not use this pin, so it is safe to leave it enabled at all times.
Signed-off-by: Gerard Salvatella gerard.salvatella@toradex.com Acked-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
board/toradex/colibri_imx6/colibri_imx6.c | 24 +++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 4d9032419a..98ad87af19 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -30,6 +30,7 @@ #include <micrel.h> #include <miiphy.h> #include <netdev.h> +#include <cpu.h>
#include "../common/tdx-cfg-block.h" #ifdef CONFIG_TDX_CMD_IMX_MFGR @@ -1061,6 +1062,26 @@ static void spl_dram_init(void) udelay(100); }
+static iomux_v3_cfg_t const gpio_reset_pad[] = { + MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL) | + MUX_MODE_SION +#define GPIO_NRESET IMX_GPIO_NR(6, 27) +}; + +#define IMX_RESET_CAUSE_POR 0x00011 +static void nreset_out(void) +{ + int reset_cause = get_imx_reset_cause(); + + if (reset_cause != IMX_RESET_CAUSE_POR) { + imx_iomux_v3_setup_multiple_pads(gpio_reset_pad, + ARRAY_SIZE(gpio_reset_pad)); + gpio_direction_output(GPIO_NRESET, 1); + udelay(100); + gpio_direction_output(GPIO_NRESET, 0); + } +} + void board_init_f(ulong dummy) { /* setup AIPS and disable watchdog */ @@ -1087,6 +1108,9 @@ void board_init_f(ulong dummy) /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start);
+ /* Assert nReset_Out */ + nreset_out(); + /* load/boot image from boot device */ board_init_r(NULL, 0); }