Add a way for devices to enable and disable themselves using ACPI code that updates GPIOs. This takes several timing parameters and supports enable, reset and stop.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v1: None
include/acpi/acpi_device.h | 41 ++++++++++++++++ lib/acpi/acpi_device.c | 99 ++++++++++++++++++++++++++++++++++++++ test/dm/acpigen.c | 68 ++++++++++++++++++++++++++ 3 files changed, 208 insertions(+)
diff --git a/include/acpi/acpi_device.h b/include/acpi/acpi_device.h index 1702fa5a53..03f08d9a3d 100644 --- a/include/acpi/acpi_device.h +++ b/include/acpi/acpi_device.h @@ -341,4 +341,45 @@ int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev); */ int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev);
+/** + * acpi_device_add_power_res() - Add a basic PowerResource block for a device + * + * This includes GPIOs to control enable, reset and stop operation of the + * device. Each GPIO is optional, but at least one must be provided. + * This can be applied to any device that has power control, so is fairly + * generic. + * + * Reset - Put the device into / take the device out of reset. + * Enable - Enable / disable power to device. + * Stop - Stop / start operation of device. + * + * @ctx: ACPI context pointer + * @tx_state_val: Mask to use to toggle the TX state on the GPIO pin, e,g. + * PAD_CFG0_TX_STATE + * @dw0_name: Name to use for access to dw0, e.g. "\_SB.GPC0" + * @reset_gpio: GPIO used to take device out of reset or to put it into reset + * @reset_delay_ms: Delay to be inserted after device is taken out of reset + * (_ON method delay) + * @reset_off_delay_ms: Delay to be inserted after device is put into reset + * (_OFF method delay) + * @enable_gpio: GPIO used to enable device + * @enable_delay_ms: Delay to be inserted after device is enabled + * @enable_off_delay_ms: Delay to be inserted after device is disabled + * (_OFF method delay) + * @stop_gpio: GPIO used to stop operation of device + * @stop_delay_ms: Delay to be inserted after disabling stop (_ON method delay) + * @stop_off_delay_ms: Delay to be inserted after enabling stop. + * (_OFF method delay) + * + * @return 0 if OK, -ve if at least one GPIO is not provided + */ +int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val, + const char *dw0_name, + const struct gpio_desc *reset_gpio, + uint reset_delay_ms, uint reset_off_delay_ms, + const struct gpio_desc *enable_gpio, + uint enable_delay_ms, uint enable_off_delay_ms, + const struct gpio_desc *stop_gpio, + uint stop_delay_ms, uint stop_off_delay_ms); + #endif diff --git a/lib/acpi/acpi_device.c b/lib/acpi/acpi_device.c index a984181a63..93e8c680b3 100644 --- a/lib/acpi/acpi_device.c +++ b/lib/acpi/acpi_device.c @@ -381,6 +381,105 @@ int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx, return 0; }
+/* PowerResource() with Enable and/or Reset control */ +int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val, + const char *dw0_name, + const struct gpio_desc *reset_gpio, + uint reset_delay_ms, uint reset_off_delay_ms, + const struct gpio_desc *enable_gpio, + uint enable_delay_ms, uint enable_off_delay_ms, + const struct gpio_desc *stop_gpio, + uint stop_delay_ms, uint stop_off_delay_ms) +{ + static const char *const power_res_dev_states[] = { "_PR0", "_PR3" }; + struct acpi_gpio reset, enable, stop; + bool has_reset, has_enable, has_stop; + int ret; + + gpio_get_acpi(reset_gpio, &reset); + gpio_get_acpi(enable_gpio, &enable); + gpio_get_acpi(stop_gpio, &stop); + has_reset = reset.pins[0]; + has_enable = enable.pins[0]; + has_stop = stop.pins[0]; + + if (!has_reset && !has_enable && !has_stop) + return -EINVAL; + + /* PowerResource (PRIC, 0, 0) */ + acpigen_write_power_res(ctx, "PRIC", 0, 0, power_res_dev_states, + ARRAY_SIZE(power_res_dev_states)); + + /* Method (_STA, 0, NotSerialized) { Return (0x1) } */ + acpigen_write_sta(ctx, 0x1); + + /* Method (_ON, 0, Serialized) */ + acpigen_write_method_serialized(ctx, "_ON", 0); + if (reset_gpio) { + ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name, + &reset, true); + if (ret) + return log_msg_ret("reset1", ret); + } + if (has_enable) { + ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name, + &enable, true); + if (ret) + return log_msg_ret("enable1", ret); + if (enable_delay_ms) + acpigen_write_sleep(ctx, enable_delay_ms); + } + if (has_reset) { + ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name, + &reset, false); + if (ret) + return log_msg_ret("reset2", ret); + if (reset_delay_ms) + acpigen_write_sleep(ctx, reset_delay_ms); + } + if (has_stop) { + ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name, + &stop, false); + if (ret) + return log_msg_ret("stop1", ret); + if (stop_delay_ms) + acpigen_write_sleep(ctx, stop_delay_ms); + } + acpigen_pop_len(ctx); /* _ON method */ + + /* Method (_OFF, 0, Serialized) */ + acpigen_write_method_serialized(ctx, "_OFF", 0); + if (has_stop) { + ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name, + &stop, true); + if (ret) + return log_msg_ret("stop2", ret); + if (stop_off_delay_ms) + acpigen_write_sleep(ctx, stop_off_delay_ms); + } + if (has_reset) { + ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name, + &reset, true); + if (ret) + return log_msg_ret("reset3", ret); + if (reset_off_delay_ms) + acpigen_write_sleep(ctx, reset_off_delay_ms); + } + if (has_enable) { + ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name, + &enable, false); + if (ret) + return log_msg_ret("enable2", ret); + if (enable_off_delay_ms) + acpigen_write_sleep(ctx, enable_off_delay_ms); + } + acpigen_pop_len(ctx); /* _OFF method */ + + acpigen_pop_len(ctx); /* PowerResource PRIC */ + + return 0; +} + /* ACPI 6.3 section 6.4.3.8.2.1 - I2cSerialBus() */ static void acpi_device_write_i2c(struct acpi_ctx *ctx, const struct acpi_i2c *i2c) diff --git a/test/dm/acpigen.c b/test/dm/acpigen.c index 06bdd63739..afaccc7664 100644 --- a/test/dm/acpigen.c +++ b/test/dm/acpigen.c @@ -791,3 +791,71 @@ static int dm_test_acpi_gpio_toggle(struct unit_test_state *uts) return 0; } DM_TEST(dm_test_acpi_gpio_toggle, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test writing ACPI code to output power-sequence info */ +static int dm_test_acpi_power_seq(struct unit_test_state *uts) +{ + struct gpio_desc reset, enable, stop; + const uint addr = 0xc00dc, addr_act_low = 0x80012; + const int txbit = BIT(2); + struct acpi_ctx *ctx; + struct udevice *dev; + u8 *ptr; + + ut_assertok(alloc_context_size(&ctx, 400)); + + ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev)); + ut_asserteq_str("a-test", dev->name); + ut_assertok(gpio_request_by_name(dev, "test2-gpios", 0, &reset, 0)); + ut_assertok(gpio_request_by_name(dev, "test2-gpios", 1, &enable, 0)); + ut_assertok(gpio_request_by_name(dev, "test2-gpios", 2, &stop, 0)); + ptr = acpigen_get_current(ctx); + + ut_assertok(acpi_device_add_power_res(ctx, txbit, "\_SB.GPC0", + &reset, 2, 3, &enable, 4, 5, + &stop, 6, 7)); + ut_asserteq(0x16a, acpigen_get_current(ctx) - ptr); + ut_asserteq_strn("PRIC", (char *)ptr + 0x18); + + /* First the 'ON' sequence - spot check */ + ut_asserteq_strn("_ON_", (char *)ptr + 0x38); + + /* reset set */ + ut_asserteq(addr + reset.offset, get_unaligned((u32 *)(ptr + 0x49))); + ut_asserteq(OR_OP, ptr[0x4e]); + + /* enable set */ + ut_asserteq(addr + enable.offset, get_unaligned((u32 *)(ptr + 0x6e))); + ut_asserteq(OR_OP, ptr[0x73]); + + /* reset clear */ + ut_asserteq(addr + reset.offset, get_unaligned((u32 *)(ptr + 0x97))); + ut_asserteq(NOT_OP, ptr[0x9c]); + + /* stop set (disable, active low) */ + ut_asserteq(addr_act_low + stop.offset, + get_unaligned((u32 *)(ptr + 0xc3))); + ut_asserteq(OR_OP, ptr[0xc8]); + + /* Now the 'OFF' sequence */ + ut_asserteq_strn("_OFF", (char *)ptr + 0xe4); + + /* stop clear (enable, active low) */ + ut_asserteq(addr_act_low + stop.offset, + get_unaligned((u32 *)(ptr + 0xf5))); + ut_asserteq(NOT_OP, ptr[0xfa]); + + /* reset clear */ + ut_asserteq(addr + reset.offset, get_unaligned((u32 *)(ptr + 0x121))); + ut_asserteq(OR_OP, ptr[0x126]); + + /* enable clear */ + ut_asserteq(addr + enable.offset, get_unaligned((u32 *)(ptr + 0x14a))); + ut_asserteq(NOT_OP, ptr[0x14f]); + + free_context(&ctx); + + return 0; +} + +DM_TEST(dm_test_acpi_power_seq, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);