Re: [U-Boot] i.MX6SL using 1.8V eMMC

adding the U-Boot mailing list in the loop. Forgot by mistake.

On Tue, Apr 29, 2014 at 6:17 PM, Otavio Salvador otavio@ossystems.com.br wrote:

Hello,

I've been trying to get a custom board working in 1.8V without dirty hacks as writing VSELECT bit in VENDORSPEC byhand after initializing it.

I tried to implement it in the fsl_esdhc driver using: http://privatepaste.com/34fba5c2ea

and also tried to set SYS_SD_VOLTAGE as well. Neither solution worked for me.

Could you give me any guidance how I should fix it properly?

-- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750