Hi, I met a problem when I compiled the Uboot source code for board trimslice as follows:
arm-none-linux-gnueabi-objcopy -O srec u-boot u-boot.srec arm-none-linux-gnueabi-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin make -C dts binary make[1]: Entering directory `/home/zql/u-boot-arm/dts' rc=$( cat /home/zql/u-boot-arm/board/compulab/dts/tegra2-trimslice.dts | arm-none-linux-gnueabi-gcc -E -P -DARCH_CPU_DTS="/home- | { { dtc -R 4 -p 0x1000 -O dtb -o dt.dtb - 2>&1 ; echo $? >&3 ; } | grep -v '^DTC: dts->dtb on file' ; } 3>&1 ) ; \ exit $rc /bin/sh: line 1: exit: too many arguments make[1]: *** [dt.dtb] Error 1 make[1]: Leaving directory `/home/zql/u-boot-arm/dts' make: *** [u-boot.dtb] Error 2
linux kernel:2.6.18-308.4.1.el5xen OS:centos 5.5 gcc:gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) arm-none-linux-gnueabi,(problem is the same with arm-linux-gcc 4.3.3 )
I had searched a similar problem about compilng Uboot about trimslice_config( http://www.mail-archive.com/u-boot@lists.denx.de/msg85352.html),but I can not solve that problem by the approach mentioned in that website,actually,I do not understand what the website mean.Is it a bug of Uboot for trimslice?So,is there any solution for that bug？Any reply will be appreciated.Thanks a lot.