Dne sreda, 16. marec 2022 ob 01:54:42 CET je Andre Przywara napisal(a):
Commit 5bc4cd05d7d4 ("sunxi: move non-essential code out of s_init()") moved the call to eth_init_board() from s_init() into board_init_f(). This means it's now only called from the SPL, which makes sense for most of the other moved low-level functions. However the GMAC pinmux and clock setup in eth_init_board() was not happy about that, so it broke the sun7i GMAC.
Since Ethernet is of no use in the SPL anyway, just move the call into board_init(), which is only run in U-Boot proper.
This fixes Ethernet operation for the A20 SoCs, which broke in v2022.04-rc1, with the above mentioned commit.
Signed-off-by: Andre Przywara andre.przywara@arm.com
Reviewed-by: Jernej Skrabec jernej.skrabec@gmail.com
I guess this function will soon go away with introduction of clock and pinctrl driver.
Best regards, Jernej
arch/arm/mach-sunxi/board.c | 1 - board/sunxi/board.c | 3 +++ 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 0071de19ffd..9a7673d82dc 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -333,7 +333,6 @@ void board_init_f(ulong dummy) clock_init(); timer_init(); gpio_init();
eth_init_board();
spl_init(); preloader_console_init();
diff --git a/board/sunxi/board.c b/board/sunxi/board.c index a0961590479..28f702bc296 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -30,6 +30,7 @@ #include <asm/arch/prcm.h> #include <asm/arch/pmic_bus.h> #include <asm/arch/spl.h> +#include <asm/arch/sys_proto.h> #include <asm/global_data.h> #include <linux/delay.h> #include <u-boot/crc.h> @@ -308,6 +309,8 @@ int board_init(void) #endif #endif /* CONFIG_DM_MMC */
- eth_init_board();
- return 0;
}
-- 2.35.1