Dear Velu pandian,
In message 49c43a250907140907w295d3297g711bf93ea4a29902@mail.gmail.com you wrote:
My name is Velu and I am from the University of Michigan. Currently I am leading one of the sub-systems where we are trying to use the Toradex PXA270 as a micro controller for a cube shaped satellite (CUBESAT) which is to be launched by the end of this year. I have been runnign into problems compiling u-boot for the PXA 270. Below is my terminal output when I run the make file. I would greatly apreciate it if you could provide me with some support so that I can proceed with finishing my task for the summer.
Just to make sure there is no misunderstanding: this list is not for providing support in the sense of what you get with a commercial support contract (you can get commercial support too, but not here and not for free).
[root@localhost u-boot-1.3.3-colibri_pxa270]# pwd
U-Boot 1.3.3 is very old. I strongly recommend to use current code instead, i. e. v2009.06 or later.
[root@localhost u-boot-1.3.3-colibri_pxa270]# make colibri_config Configuring for colibri board...
Argh... You are using an out-of-tree port. I guess you got to ask those for help who provided this port to you. We don;t know it and cannot help you with it.
[root@localhost u-boot-1.3.3-colibri_pxa270]# make make: arm-linux-gcc: Command not found
Argh.. You don;t have a cross tool chain installed, or at least not configured. You need that. You could for example unse the ELDK; see http://www.denx.de/wiki/view/DULG/ELDKAvailability
/bin/sh: line 2: gcc: command not found
Arrrghh... you don;t have a native tool chain installed either. Your Linux system is missing basic tools needed for C development. You gotta install the needed tools first.
Best regards,
Wolfgang Denk