Add a separate function for starting the clock, stopping the clock and setting the clock. Starting the clock and stopping the clock can be used irrespective of setting the clock (For example during iodelay recalibration). Also set the clock only if there is a change in frequency.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com
---
Changes in v3: - in omap_hsmmc_set_clock(), if mmc->clock is zero, use the max divider.
arch/arm/include/asm/omap_mmc.h | 2 ++ drivers/mmc/omap_hsmmc.c | 76 ++++++++++++++++++++++++++++------------- 2 files changed, 54 insertions(+), 24 deletions(-)
diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h index bf9de9b..102aec2 100644 --- a/arch/arm/include/asm/omap_mmc.h +++ b/arch/arm/include/asm/omap_mmc.h @@ -172,6 +172,8 @@ struct omap_hsmmc_plat { #define CLK_400KHZ 1 #define CLK_MISC 2
+#define CLKD_MAX 0x3FF /* max clock divisor: 1023 */ + #define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) #define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index b12d6d9..fa8681a 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -62,6 +62,7 @@ struct omap_hsmmc_data { #if !CONFIG_IS_ENABLED(DM_MMC) struct mmc_config cfg; #endif + uint clock; #ifdef OMAP_HSMMC_USE_GPIO #if CONFIG_IS_ENABLED(DM_MMC) struct gpio_desc cd_gpio; /* Change Detect GPIO */ @@ -114,6 +115,8 @@ struct omap_hsmmc_adma_desc { static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int siz); +static void omap_hsmmc_start_clock(struct hsmmc *mmc_base); +static void omap_hsmmc_stop_clock(struct hsmmc *mmc_base);
static inline struct omap_hsmmc_data *omap_hsmmc_get_data(struct mmc *mmc) { @@ -764,6 +767,53 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, return 0; }
+static void omap_hsmmc_stop_clock(struct hsmmc *mmc_base) +{ + writel(readl(&mmc_base->sysctl) & ~CEN_ENABLE, &mmc_base->sysctl); +} + +static void omap_hsmmc_start_clock(struct hsmmc *mmc_base) +{ + writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); +} + +static void omap_hsmmc_set_clock(struct mmc *mmc) +{ + struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); + struct hsmmc *mmc_base; + unsigned int dsor = 0; + ulong start; + + mmc_base = priv->base_addr; + omap_hsmmc_stop_clock(mmc_base); + + /* TODO: Is setting DTO required here? */ + mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK), + (ICE_STOP | DTO_15THDTO)); + + if (mmc->clock != 0) { + dsor = DIV_ROUND_UP(MMC_CLOCK_REFERENCE * 1000000, mmc->clock); + if (dsor > CLKD_MAX) + dsor = CLKD_MAX; + } else { + dsor = CLKD_MAX; + } + + mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK, + (dsor << CLKD_OFFSET) | ICE_OSCILLATE); + + start = get_timer(0); + while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) { + if (get_timer(0) - start > MAX_RETRY_MS) { + printf("%s: timedout waiting for ics!\n", __func__); + return; + } + } + + priv->clock = mmc->clock; + omap_hsmmc_start_clock(mmc_base); +} + #if !CONFIG_IS_ENABLED(DM_MMC) static int omap_hsmmc_set_ios(struct mmc *mmc) { @@ -776,8 +826,6 @@ static int omap_hsmmc_set_ios(struct udevice *dev) struct mmc *mmc = upriv->mmc; #endif struct hsmmc *mmc_base; - unsigned int dsor = 0; - ulong start;
mmc_base = priv->base_addr; /* configue bus width */ @@ -803,28 +851,8 @@ static int omap_hsmmc_set_ios(struct udevice *dev) break; }
- /* configure clock with 96Mhz system clock. - */ - if (mmc->clock != 0) { - dsor = (MMC_CLOCK_REFERENCE * 1000000 / mmc->clock); - if ((MMC_CLOCK_REFERENCE * 1000000) / dsor > mmc->clock) - dsor++; - } - - mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK), - (ICE_STOP | DTO_15THDTO)); - - mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK, - (dsor << CLKD_OFFSET) | ICE_OSCILLATE); - - start = get_timer(0); - while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) { - if (get_timer(0) - start > MAX_RETRY_MS) { - printf("%s: timedout waiting for ics!\n", __func__); - return -ETIMEDOUT; - } - } - writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); + if (priv->clock != mmc->clock) + omap_hsmmc_set_clock(mmc);
return 0; }