Dear all I know the applying would be READ the list.However,I have run through the list, but I still can find the right message. Could anybody direct me to get it? Maybe somebody can show me the keyword or title. I am very grateful to your help. Best regaeds.
--- kabbin kabbin26@yahoo.com.tw 說：
Dear all: I download the new version from ftp://ftp.denx.de/pub/u-boot/u-boot.tar.bz2 (20060810 released ) but I still get the same error messages after building. Maybe there are something wrong with my tool chain (arm-linux-gcc-4.0.2) ? Best Regards. kabbin kabbin26@yahoo.com.tw 說： Dear all: I am new to git, I use the following commend to get uboot $git clone rsync://source.denx.net/git/u-boot.git u-boot.git
And finally I got :
$sent 115275 bytes received 56318206 bytes 32686.64 bytes/sec total size is 55817433 speedup is 0.99 Checking files out... 100% (4356/4356) done
Is that all? Does it means I got the newest version of uboot?
$cd uboot.git $make distclean $make omap2420h4_congfig $make
Oops! I still got
***************************************************************************
--start-grouplib_generic/libgeneric.a board/omap2420h4/libomap2420h4.a cpu/arm1136/libarm1136.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/nand/libnand.a drivers/nand_legacy/libnand_legacy.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a --end-group -L
/usr/local/arm/gcc-4.0.2/bin/../lib/gcc/arm-linux/4.0.2
-lgcc \ -Map u-boot.map -o u-boot common/libcommon.a(env_flash.o): In function `env_init':
/home/yanming/Desktop/u-boot.git/common/env_flash.c:265:
undefined reference to `flash_probe' make: *** [u-boot] Error 1
*******************************************************************
And I fraid I could not find the patch on the mail achieve. but I got
http://linux.omap.com/pipermail/linux-omap-open-source/2005-December/006018....
However it seems little help for me.
Any suggestions? Thanks . Best Regards :-)
Wolfgang Denk wd@denx.de 說： In message you wrote:
The current U-Boot code is broken, and the board
maintainer (Richard
Woodruff, on Cc:) did not care so far.
Well, that is partially true. I have not tried to
resync for many
months now. Previous patches lagged commit so
long that that it was not
necessary workable by the time they were applied.
The code has been
pretty dynamic as perhaps a dozen versions of the
board appeared in a
very short time.
Use git, and provide access to your repo.
Some of those issues dealt with the cfi_flash code
and what was
acceptable. That code has changed much since then
and is perhaps worth
trying against again. The NAND tree has also
changed a lot and will
take more effort to re-validate.
You will run into this again and again the longer you keep disconnected from the development in the main repo. Use git 9or one of the porcelains, for example stgit), and update often.
Best regards,
Wolfgang Denk
-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Some people march to the beat of a different drummer. And some people tango!
最新版 Yahoo!奇摩即時通訊 7.0，免費網路電話任你打！
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&da... _______________________________________________
U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
___________________________________________________ 最新版 Yahoo!奇摩即時通訊 7.0，免費網路電話任你打！ http://messenger.yahoo.com.tw/