Switch from legacy IDE driver to sata_mv driver.
Signed-off-by: Michael Walle michael@walle.cc --- configs/lschlv2_defconfig | 4 ++-- configs/lsxhl_defconfig | 4 ++-- include/configs/lsxl.h | 23 ++++++++++------------- 3 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index e1ff355731..c550798bcd 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -16,7 +16,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_IDE=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -26,7 +26,7 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lschlv2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y -CONFIG_MVSATA_IDE=y +CONFIG_SATA_MV=y CONFIG_BLK=y # CONFIG_MMC is not set CONFIG_DM_SPI_FLASH=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 48678bdb8f..efcce455a4 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -16,7 +16,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_IDE=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -26,7 +26,7 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lsxhl" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y -CONFIG_MVSATA_IDE=y +CONFIG_SATA_MV=y CONFIG_BLK=y # CONFIG_MMC is not set CONFIG_DM_SPI_FLASH=y diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 72e62658d0..55c4e63325 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -76,9 +76,9 @@ "kernel_addr=0x00800000\0" \ "ramdisk_addr=0x01000000\0" \ "fdt_addr=0x00ff0000\0" \ - "bootcmd_legacy=ide reset " \ - "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ - "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ + "bootcmd_legacy=sata init " \ + "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\ + "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ "&& tftpboot ${ramdisk_addr} initrd.img " \ @@ -86,11 +86,11 @@ "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ "&& bootz ${kernel_addr} " \ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ - "bootcmd_hdd=ide reset " \ - "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ - "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ + "bootcmd_hdd=sata init " \ + "&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \ + "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \ "&& setenv ramdisk_len ${filesize} " \ - "&& load ide ${hdpart} ${fdt_addr} /dtb " \ + "&& load sata ${hdpart} ${fdt_addr} /dtb " \ "&& bootz ${kernel_addr} " \ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ @@ -131,13 +131,10 @@ #undef CONFIG_RESET_PHY_R #endif /* CONFIG_CMD_NET */
-#ifdef CONFIG_IDE -#undef CONFIG_SYS_IDE_MAXBUS -#define CONFIG_SYS_IDE_MAXBUS 1 -#undef CONFIG_SYS_IDE_MAXDEVICE -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#ifdef CONFIG_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_SYS_64BIT_LBA +#define CONFIG_LBA48 #endif
#endif /* _CONFIG_LSXL_H */