This is Ramji from A.P ,India.I am new to u-boot. I am using BMW board. i used Sandpoint8245_config for board configuration based on the CPU when i load the u-boot.bin i got following o/p ++++++++++++++++++++++++++++++++++
U-Boot 1.1.6 (Sep 2 2008 - 20:22:29)
CPU: MPC8245 Revision 1.2 at 166.666 MHz: 16 kB I-Cache 16 kB D-Cache Board: Sandpoint 8245 Unity ##Test not implemented yet## I2C: ready DRAM: 64 MB FLASH: *** failed *** ### ERROR ### Please RESET the board ###
++++++++++++++++++++++++++++++++++++++++++++++
Can anyone help me in booting u-boot for my board and please clarify my queries...
1.Did i configured u-boot correctly for my board.If so what else i have to do to boot the board smoothly.
2.which cross compiler i have to use to compile this and where can we get it?
Thanks a lot in advance.
Regards, Ramji