From: Ashok Reddy Soma ashok.reddy.soma@xilinx.com
Based on discussion at https://lore.kernel.org/r/20200318125003.GA2727094@kroah.com we got recommendation to use explicit values for all enums.
So, add explicit values to all pinctrl related enums for readability.
Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com ---
include/dm/pinctrl.h | 48 ++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 8b869c4fbfb7..0c461e56bb48 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -453,30 +453,30 @@ struct pinctrl_ops { * presented using the packed format. */ enum pin_config_param { - PIN_CONFIG_BIAS_BUS_HOLD, - PIN_CONFIG_BIAS_DISABLE, - PIN_CONFIG_BIAS_HIGH_IMPEDANCE, - PIN_CONFIG_BIAS_PULL_DOWN, - PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, - PIN_CONFIG_BIAS_PULL_UP, - PIN_CONFIG_DRIVE_OPEN_DRAIN, - PIN_CONFIG_DRIVE_OPEN_SOURCE, - PIN_CONFIG_DRIVE_PUSH_PULL, - PIN_CONFIG_DRIVE_STRENGTH, - PIN_CONFIG_DRIVE_STRENGTH_UA, - PIN_CONFIG_INPUT_DEBOUNCE, - PIN_CONFIG_INPUT_ENABLE, - PIN_CONFIG_INPUT_SCHMITT, - PIN_CONFIG_INPUT_SCHMITT_ENABLE, - PIN_CONFIG_LOW_POWER_MODE, - PIN_CONFIG_OUTPUT_ENABLE, - PIN_CONFIG_OUTPUT, - PIN_CONFIG_POWER_SOURCE, - PIN_CONFIG_SLEEP_HARDWARE_STATE, - PIN_CONFIG_SLEW_RATE, - PIN_CONFIG_SKEW_DELAY, - PIN_CONFIG_END = 0x7F, - PIN_CONFIG_MAX = 0xFF, + PIN_CONFIG_BIAS_BUS_HOLD = 0, + PIN_CONFIG_BIAS_DISABLE = 1, + PIN_CONFIG_BIAS_HIGH_IMPEDANCE = 2, + PIN_CONFIG_BIAS_PULL_DOWN = 3, + PIN_CONFIG_BIAS_PULL_PIN_DEFAULT = 4, + PIN_CONFIG_BIAS_PULL_UP = 5, + PIN_CONFIG_DRIVE_OPEN_DRAIN = 6, + PIN_CONFIG_DRIVE_OPEN_SOURCE = 7, + PIN_CONFIG_DRIVE_PUSH_PULL = 8, + PIN_CONFIG_DRIVE_STRENGTH = 9, + PIN_CONFIG_DRIVE_STRENGTH_UA = 10, + PIN_CONFIG_INPUT_DEBOUNCE = 11, + PIN_CONFIG_INPUT_ENABLE = 12, + PIN_CONFIG_INPUT_SCHMITT = 13, + PIN_CONFIG_INPUT_SCHMITT_ENABLE = 14, + PIN_CONFIG_LOW_POWER_MODE = 15, + PIN_CONFIG_OUTPUT_ENABLE = 16, + PIN_CONFIG_OUTPUT = 17, + PIN_CONFIG_POWER_SOURCE = 18, + PIN_CONFIG_SLEEP_HARDWARE_STATE = 19, + PIN_CONFIG_SLEW_RATE = 20, + PIN_CONFIG_SKEW_DELAY = 21, + PIN_CONFIG_END = 127, /* 0x7F */ + PIN_CONFIG_MAX = 255, /* 0xFF */ };
#if CONFIG_IS_ENABLED(PINCTRL_GENERIC)