Hi Wolfgang Denk,
I have a custom board with Processor is Samsung 2412 , Arm926EJ-S. ( My board has 64MB mobile SDRAM , 32MB Nand Flash. Serial Port, and USB ) no other devices as of now.
I have received a u-boot source
1.1.4 from Samsung FAE. With added files for SMDK2412 board. I have compiled and produced a u-boot.bin . And loaded this file into the NAND flash using JTAG.
On power on i see the u-boot prompt. on minicom. The problem i'm facing now are.
1. address 0x3000_0000, 0x3100_0000, 0x3200_0000 ,0x3300_0000 pointing to same memory. a Write in 3000_0000 is duplicated in the other 3 locations also.
2. I use "loadb" command to transfer a bin file. but if i try to write the file to Nand Flash using "nand write" command I get error. and Board hangs.
I have contacted Samsung FAE. but not got any technical support on this issue till now.
Regards,
Swapnil
On 3/15/07, Wolfgang Denk <
wd@denx.de> wrote:
In message <48c25dd10703150323y3f6b49d5la946898ee8ca7f0f@mail.gmail.com
> you wrote:
>
> I want to know more about the memory remap of u-boot.
And your architecture and procxessor type is ...?
> Also , which files to modify to suit my physical memory map.
Make sure to read the README.
> ------=_Part_69297_29799172.1173954199161
> Content-Type: text/html; charset=ISO-8859-1
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline
And NEVER post HTML on this list!
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email:
wd@denx.de
A direct quote from the Boss: "We passed over a lot of good people to
get the ones we hired."