From: Patrick Delaunay patrick.delaunay@st.com
Replace setparity by more generic setconfig ops to allow uart parity, bits word length and stop bits number change.
Adds SERIAL_GET_PARITY/BITS/STOP macros.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com Signed-off-by: Patrice Chotard patrice.chotard@st.com ---
drivers/serial/serial-uclass.c | 14 ++++++++++++++ include/serial.h | 42 +++++++++++++++++++++++++++++++++++++++--- 2 files changed, 53 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 321d23ee93bf..9f523751ce17 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -287,6 +287,18 @@ void serial_setbrg(void) ops->setbrg(gd->cur_serial_dev, gd->baudrate); }
+void serial_setconfig(u8 config) +{ + struct dm_serial_ops *ops; + + if (!gd->cur_serial_dev) + return; + + ops = serial_get_ops(gd->cur_serial_dev); + if (ops->setconfig) + ops->setconfig(gd->cur_serial_dev, config); +} + void serial_stdio_init(void) { } @@ -398,6 +410,8 @@ static int serial_post_probe(struct udevice *dev) ops->pending += gd->reloc_off; if (ops->clear) ops->clear += gd->reloc_off; + if (ops->setconfig) + ops->setconfig += gd->reloc_off; #if CONFIG_POST & CONFIG_SYS_POST_UART if (ops->loop) ops->loop += gd->reloc_off diff --git a/include/serial.h b/include/serial.h index b9ef6d91c9c5..61c1362e9e32 100644 --- a/include/serial.h +++ b/include/serial.h @@ -73,6 +73,39 @@ enum serial_par { SERIAL_PAR_EVEN };
+#define SERIAL_PAR_MASK 0x03 +#define SERIAL_PAR_SHIFT 0 +#define SERIAL_GET_PARITY(config) \ + ((config & SERIAL_PAR_MASK) >> SERIAL_PAR_SHIFT) + +enum serial_bits { + SERIAL_5_BITS, + SERIAL_6_BITS, + SERIAL_7_BITS, + SERIAL_8_BITS +}; + +#define SERIAL_BITS_MASK 0x0C +#define SERIAL_BITS_SHIFT 2 +#define SERIAL_GET_BITS(config) \ + ((config & SERIAL_BITS_MASK) >> SERIAL_BITS_SHIFT) + +enum serial_stop { + SERIAL_HALF_STOP, /* 0.5 stop bit */ + SERIAL_ONE_STOP, /* 1 stop bit */ + SERIAL_ONE_HALF_STOP, /* 1.5 stop bit */ + SERIAL_TWO_STOP /* 2 stop bit */ +}; + +#define SERIAL_STOP_MASK 0x30 +#define SERIAL_STOP_SHIFT 4 +#define SERIAL_GET_STOP(config) \ + ((config & SERIAL_STOP_MASK) >> SERIAL_STOP_SHIFT) + +#define SERIAL_DEFAULT_CONFIG SERIAL_PAR_NONE << SERIAL_PAR_SHIFT | \ + SERIAL_8_BITS << SERIAL_BITS_SHIFT | \ + SERIAL_ONE_STOP << SERIAL_STOP_SHIFT + /** * struct struct dm_serial_ops - Driver model serial operations * @@ -150,15 +183,18 @@ struct dm_serial_ops { int (*loop)(struct udevice *dev, int on); #endif /** - * setparity() - Set up the parity + * setconfig() - Set up the uart configuration + * (parity, 5/6/7/8 bits word length, stop bits) * - * Set up a new parity for this device. + * Set up a new config for this device. * * @dev: Device pointer * @parity: parity to use + * @bits: bits number to use + * @stop: stop bits number to use * @return 0 if OK, -ve on error */ - int (*setparity)(struct udevice *dev, enum serial_par parity); + int (*setconfig)(struct udevice *dev, u8 serial_config); };
/**