Enable the USB3.0 host node, and gadget node. The gadget is available through the USB type C connector on the board. The connector is tied to a Fairchild fusb302b device, which currently does not have a driver in U-boot, but the node is here for correct description of the board + Linux future compatibility. It will be easier to move the node as-is when it will be available in the DT from Linux
Signed-off-by: Eugen Hristev eugen.hristev@collabora.com --- arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 197 ++++++++++++++++++++++++ 1 file changed, 197 insertions(+)
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi index 1cd8a57a6fa6..5a3292699640 100644 --- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi +++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/usb/pd.h>
/ { aliases { @@ -18,6 +19,25 @@ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci; };
+ vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; @@ -29,6 +49,28 @@ pinctrl-0 = <&vcc5v0_host_en>; vin-supply = <&vcc5v0_sys>; }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + vbus5v0_typec: vbus5v0-typec { + compatible = "regulator-fixed"; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc5v0_usb>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + }; };
&combphy0_ps { @@ -85,6 +127,16 @@ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + typec5v_pwren: typec5v-pwren { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; };
&pcfg_pull_none { @@ -168,6 +220,15 @@ status = "okay"; };
+&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + rockchip,typec-vbus-det; + status = "okay"; +}; + &u2phy2 { resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; reset-names = "phy", "apb"; @@ -209,3 +270,139 @@ status = "okay"; };
+&usbdp_phy0 { + orientation-switch; + svid = <0xff01>; + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +}; + +&usbdp_phy0_u3 { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usbdp_phy1 { + rockchip,dp-lane-mux = <2 3>; + status = "okay"; +}; + +&usbdp_phy1_u3 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&i2c4 { + pinctrl-0 = <&i2c4m1_xfer>; + status = "okay"; + + usbc0: fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus5v0_typec>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_role_sw: endpoint@0 { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + }; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + op-sink-microwatt = <1000000>; + sink-pdos = + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + + altmodes { + #address-cells = <1>; + #size-cells = <0>; + + altmode@0 { + reg = <0>; + svid = <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; +}; +