The Buck3 on DHCOR is used to supply IO voltage. It can output either 3V3 in the default DHCOR configuration, or 2V9 in case of AV96 DHCOR variant which has extra Empirion DCDC converter in front of the 1V8 IO supply, or outright 1V8 in case of 1V8 IO DHCOR without the Empirion DCDC converter.
The 2V9 mode in case of AV96 DHCOR variant is used to reduce unnecessarily high input voltage to the Empirion DCDC converter, so move it into matching DTSI to stop confusing users.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi | 5 +++++ arch/arm/dts/stm32mp15xx-dhcor-som.dtsi | 4 ++-- 2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi index 75172314d7a..9937b28548c 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi @@ -18,6 +18,11 @@ }; };
+&vdd { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; +}; + &pwr_regulators { vdd-supply = <&vdd_io>; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi index 44ecc470858..98033b51479 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi @@ -77,8 +77,8 @@
vdd: buck3 { regulator-name = "vdd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-initial-mode = <0>; regulator-over-current-protection;