Early instantiation of this I2C device would lock up when being probed.
Signed-off-by: Jorge Ramirez-Ortiz jorge@foundries.io --- drivers/tee/optee/Kconfig | 14 +++++++++++++ drivers/tee/optee/i2c.c | 44 +++++++++++++++++++++++++++++++++++---- 2 files changed, 54 insertions(+), 4 deletions(-)
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig index d03028070b..05dfe2c9a8 100644 --- a/drivers/tee/optee/Kconfig +++ b/drivers/tee/optee/Kconfig @@ -37,6 +37,20 @@ config OPTEE_TA_SCP03 help Enables support for controlling (enabling, provisioning) the Secure Channel Protocol 03 operation in the OP-TEE SCP03 TA. + +config TEE_I2C_NXP_SE05X_ERRATA + bool "Enable NXP SE05X Errata" + select TEE_I2C_NXP_SE05X_ERRATA_IN_BUS + default y + help + This config prevents the I2C trampoline driver from probing + on every transfer. + +config TEE_I2C_NXP_SE05X_ERRATA_IN_BUS + int "I2C bus where to apply the NXP SE05X errata" + depends on TEE_I2C_NXP_SE05X_ERRATA + default 0 + endmenu
endif diff --git a/drivers/tee/optee/i2c.c b/drivers/tee/optee/i2c.c index ef4e10f991..a3ea34d4a2 100644 --- a/drivers/tee/optee/i2c.c +++ b/drivers/tee/optee/i2c.c @@ -3,13 +3,18 @@ * Copyright (c) 2020 Foundries.io Ltd */
+#define LOG_CATEGORY UCLASS_I2C + #include <common.h> #include <dm.h> #include <i2c.h> +#include <stdlib.h> #include <tee.h> #include "optee_msg.h" #include "optee_private.h"
+#define NXP_SE05X_ADDR 0x48 + static int check_xfer_flags(struct udevice *chip, uint tee_flags) { uint flags; @@ -30,6 +35,30 @@ static int check_xfer_flags(struct udevice *chip, uint tee_flags) return 0; }
+static struct udevice *get_chip_dev(int bnum, int addr) +{ + struct udevice *chip; + struct udevice *bus; + + if (IS_ENABLED(CONFIG_TEE_I2C_NXP_SE05X_ERRATA)) { + if (bnum == CONFIG_TEE_I2C_NXP_SE05X_ERRATA_IN_BUS && + addr == NXP_SE05X_ADDR) { + if (uclass_get_device_by_seq(UCLASS_I2C, bnum, &bus)) + return NULL; + + if (i2c_get_chip(bus, addr, 0, &chip)) + return NULL; + + return chip; + } + } + + if (i2c_get_chip_for_busnum(bnum, addr, 0, &chip)) + return NULL; + + return chip; +} + void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg) { const u8 attr[] = { @@ -38,7 +67,8 @@ void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg) OPTEE_MSG_ATTR_TYPE_RMEM_INOUT, OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT, }; - struct udevice *chip_dev; + struct udevice *chip_dev = NULL; + struct tee_shm *shm; u8 *buf; int ret; @@ -56,9 +86,9 @@ void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg) if (!buf) goto bad;
- if (i2c_get_chip_for_busnum((int)arg->params[0].u.value.b, - (int)arg->params[0].u.value.c, - 0, &chip_dev)) + chip_dev = get_chip_dev((int)arg->params[0].u.value.b, + (int)arg->params[0].u.value.c); + if (!chip_dev) goto bad;
if (check_xfer_flags(chip_dev, arg->params[1].u.value.a)) @@ -66,10 +96,16 @@ void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg)
switch (arg->params[0].u.value.a) { case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD: + log_debug("OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD %d\n", + (size_t)arg->params[2].u.rmem.size); + ret = dm_i2c_read(chip_dev, 0, buf, (size_t)arg->params[2].u.rmem.size); break; case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR: + log_debug("OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR %d\n", + (size_t)arg->params[2].u.rmem.size); + ret = dm_i2c_write(chip_dev, 0, buf, (size_t)arg->params[2].u.rmem.size); break;