Hi Peng,
On 11/02/2015 02:59, Peng Fan wrote:
Hi, Stefano
On 1/30/2015 1:48 AM, Stefano Babic wrote:
On 27/01/2015 03:14, Peng Fan wrote:
This patch is to implement pmic_mode_init function, and add prototype in header file.
This function is to set switching mode for pmic buck regulators to improve system efficiency.
Mode: OFF: The regulator is switched off and the output voltage is discharged. PFM: In this mode, the regulator is always in PFM mode, which is useful at light loads for optimized efficiency. PWM: In this mode, the regulator is always in PWM mode operation regardless of load conditions. APS: In this mode, the regulator moves automatically between pulse skipping mode and PWM mode depending on load conditions.
Signed-off-by: Peng Fan Peng.Fan@freescale.com Acked-by: Przemyslaw Marczak p.marczak@samsung.com
Applied to u-boot-imx, thanks !
I did not see this patch applied to u-boot-imx, I saw only patch 1/3 is applied. Do you miss this one?
I see. I have applied only patches that are assigned to me (in patchwork), in this case only Patch 1/3. Patch 2 and 3 were still assigned to Przemyslaw (but we have his ACK). I assign the patches to me and I will apply them.
However, something bad happened. No idea how it could happen, but applying patch1/3, the define for SWITCH_SIZE disappeared - see in file. I cannot find a valid reason for that. I fix it myself, and I start rebuilding to check breakage before pushing on the server.
Best regards, Stefano Babic