The default IGEP configuration doesn't do anything useful; using some boot.scr search logic like BeagleBoard is much more useful.
Signed-off-by: Loïc Minier loic.minier@linaro.org Signed-off-by: Enric Balletbo i Serra eballetbo@iseebcn.com --- include/configs/igep0020.h | 57 ++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 52 insertions(+), 5 deletions(-)
diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h index c19ecc0..fc15a9c 100644 --- a/include/configs/igep0020.h +++ b/include/configs/igep0020.h @@ -129,14 +129,61 @@ */ #define CONFIG_TWL4030_POWER 1
-/* Environment information */ -#define CONFIG_BOOTCOMMAND \ - "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0" - #define CONFIG_BOOTDELAY 3
#define CONFIG_EXTRA_ENV_SETTINGS \ - "usbtty=cdc_acm\0" + "usbtty=cdc_acm\0" \ + "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ + "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=jffs2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from onenand ...; " \ + "run nandargs; " \ + "onenand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi"
#define CONFIG_AUTO_COMPLETE 1