This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it.
Cc: Steve Rae steve.rae@raedomain.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/Kconfig | 7 -- board/broadcom/bcm23550_w1d/Kconfig | 15 --- board/broadcom/bcm23550_w1d/MAINTAINERS | 6 - board/broadcom/bcm23550_w1d/Makefile | 5 - board/broadcom/bcm23550_w1d/bcm23550_w1d.c | 125 --------------------- configs/bcm23550_w1d_defconfig | 47 -------- include/configs/bcm23550_w1d.h | 100 ----------------- 7 files changed, 305 deletions(-) delete mode 100644 board/broadcom/bcm23550_w1d/Kconfig delete mode 100644 board/broadcom/bcm23550_w1d/MAINTAINERS delete mode 100644 board/broadcom/bcm23550_w1d/Makefile delete mode 100644 board/broadcom/bcm23550_w1d/bcm23550_w1d.c delete mode 100644 configs/bcm23550_w1d_defconfig delete mode 100644 include/configs/bcm23550_w1d.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6cf49b8ef050..9777dd6d4d9a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -656,12 +656,6 @@ config ARCH_BCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips.
-config TARGET_BCM23550_W1D - bool "Support bcm23550_w1d" - select CPU_V7A - imply CRC32_VERIFY - imply FAT_WRITE - config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7A @@ -1925,7 +1919,6 @@ source "board/Marvell/octeontx/Kconfig" source "board/Marvell/octeontx2/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" -source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm963158/Kconfig" source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" diff --git a/board/broadcom/bcm23550_w1d/Kconfig b/board/broadcom/bcm23550_w1d/Kconfig deleted file mode 100644 index 007a127250d6..000000000000 --- a/board/broadcom/bcm23550_w1d/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_BCM23550_W1D - -config SYS_BOARD - default "bcm23550_w1d" - -config SYS_VENDOR - default "broadcom" - -config SYS_SOC - default "bcm235xx" - -config SYS_CONFIG_NAME - default "bcm23550_w1d" - -endif diff --git a/board/broadcom/bcm23550_w1d/MAINTAINERS b/board/broadcom/bcm23550_w1d/MAINTAINERS deleted file mode 100644 index bde6337ce34f..000000000000 --- a/board/broadcom/bcm23550_w1d/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BCM23550_W1D BOARD -M: Steve Rae steve.rae@raedomain.com -S: Maintained -F: board/broadcom/bcm23550_w1d/ -F: include/configs/bcm23550_w1d.h -F: configs/bcm23550_w1d_defconfig diff --git a/board/broadcom/bcm23550_w1d/Makefile b/board/broadcom/bcm23550_w1d/Makefile deleted file mode 100644 index 0552f3762e80..000000000000 --- a/board/broadcom/bcm23550_w1d/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2013 Broadcom Corporation. - -obj-y += bcm23550_w1d.o diff --git a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c b/board/broadcom/bcm23550_w1d/bcm23550_w1d.c deleted file mode 100644 index 90685c072a3b..000000000000 --- a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Broadcom Corporation. - */ - -#include <common.h> -#include <init.h> -#include <log.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/mach-types.h> -#include <env.h> -#include <mmc.h> -#include <asm/kona-common/kona_sdhci.h> -#include <asm/kona-common/clk.h> -#include <asm/arch/sysmap.h> - -#include <usb.h> -#include <usb/dwc2_udc.h> -#include <g_dnl.h> - -#define SECWATCHDOG_SDOGCR_OFFSET 0x00000000 -#define SECWATCHDOG_SDOGCR_EN_SHIFT 27 -#define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT 26 -#define SECWATCHDOG_SDOGCR_CLKS_SHIFT 20 -#define SECWATCHDOG_SDOGCR_LD_SHIFT 0 - -#ifndef CONFIG_USB_SERIALNO -#define CONFIG_USB_SERIALNO "1234567890" -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * board_init - early hardware init - */ -int board_init(void) -{ - printf("Relocation Offset is: %08lx\n", gd->reloc_off); - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - clk_init(); - - return 0; -} - -/* - * misc_init_r - miscellaneous platform dependent initializations - */ -int misc_init_r(void) -{ - return 0; -} - -/* - * dram_init - sets uboots idea of sdram size - */ -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -/* This is called after dram_init() so use get_ram_size result */ -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; - - return 0; -} - -#ifdef CONFIG_MMC_SDHCI_KONA -/* - * mmc_init - Initializes mmc - */ -int board_mmc_init(struct bd_info *bis) -{ - int ret = 0; - - /* Register eMMC - SDIO2 */ - ret = kona_sdhci_init(1, 400000, 0); - if (ret) - return ret; - - /* Register SD Card - SDIO4 kona_mmc_init assumes 0 based index */ - ret = kona_sdhci_init(3, 400000, 0); - return ret; -} -#endif - -#ifdef CONFIG_USB_GADGET -static struct dwc2_plat_otg_data bcm_otg_data = { - .regs_otg = HSOTG_BASE_ADDR -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - debug("%s: performing dwc2_udc_probe\n", __func__); - return dwc2_udc_probe(&bcm_otg_data); -} - -int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) -{ - debug("%s\n", __func__); - if (!env_get("serial#")) - g_dnl_set_serialnumber(CONFIG_USB_SERIALNO); - return 0; -} - -int g_dnl_get_board_bcd_device_number(int gcnum) -{ - debug("%s\n", __func__); - return 1; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - debug("%s\n", __func__); - return 0; -} -#endif diff --git a/configs/bcm23550_w1d_defconfig b/configs/bcm23550_w1d_defconfig deleted file mode 100644 index 021de69799b5..000000000000 --- a/configs/bcm23550_w1d_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_ICACHE_OFF=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y -CONFIG_TARGET_BCM23550_W1D=y -CONFIG_SYS_TEXT_BASE=0x9f000000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x2340000 -# CONFIG_ANDROID_BOOT_IMAGE is not set -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_MISC_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_MX_CYCLIC=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_FAT=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x80000000 -CONFIG_FASTBOOT_BUF_SIZE=0x1D000000 -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_SDMA=y -CONFIG_MMC_SDHCI_KONA=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Broadcom Corporation" -CONFIG_USB_GADGET_VENDOR_NUM=0x18d1 -CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02 -CONFIG_USB_GADGET_BCM_UDC_OTG_PHY=y -CONFIG_USB_GADGET_DWC2_OTG=y -CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h deleted file mode 100644 index 05ada258eacf..000000000000 --- a/include/configs/bcm23550_w1d.h +++ /dev/null @@ -1,100 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013 Broadcom Corporation. - */ - -#ifndef __BCM23550_W1D_H -#define __BCM23550_W1D_H - -#include <linux/sizes.h> -#include <asm/arch/sysmap.h> - -/* CPU, chip, mach, etc */ -#define CONFIG_KONA -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_KONA_RESET_S - -/* - * Memory configuration - */ - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_SDRAM_SIZE 0x20000000 - -#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ - -/* GPIO Driver */ -#define CONFIG_KONA_GPIO - -/* MMC/SD Driver */ -#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR -#define CONFIG_SYS_SDIO0_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO1_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO2_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO3_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO0 "sdio1" -#define CONFIG_SYS_SDIO1 "sdio2" -#define CONFIG_SYS_SDIO2 "sdio3" -#define CONFIG_SYS_SDIO3 "sdio4" - -/* I2C Driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_KONA -#define CONFIG_SYS_SPD_BUS_NUM 3 /* Start with PMU bus */ -#define CONFIG_SYS_MAX_I2C_BUS 4 -#define CONFIG_SYS_I2C_BASE0 BSC1_BASE_ADDR -#define CONFIG_SYS_I2C_BASE1 BSC2_BASE_ADDR -#define CONFIG_SYS_I2C_BASE2 BSC3_BASE_ADDR -#define CONFIG_SYS_I2C_BASE3 PMU_BSC_BASE_ADDR - -/* Timer Driver */ -#define CONFIG_SYS_TIMER_RATE 32000 -#define CONFIG_SYS_TIMER_COUNTER (TIMER_BASE_ADDR + 4) /* STCLO offset */ - -/* Init functions */ - -/* Some commands use this as the default load address */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE - -/* No mtest functions as recommended */ - -/* - * This is the initial SP which is used only briefly for relocating the u-boot - * image to the top of SDRAM. After relocation u-boot moves the stack to the - * proper place. - */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - -/* Serial Info */ -#define CONFIG_SYS_NS16550_SERIAL -/* Post pad 3 bytes after each reg addr */ -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 13000000 -#define CONFIG_SYS_NS16550_COM1 0x3e000000 - -/* must fit into GPT:u-boot-env partition */ - -/* console configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * One partition type must be defined for part.c - * This is necessary for the fatls command to work on an SD card - * for example. - */ - -/* version string, parser, etc */ - -/* Initial upstream - boot to cmd prompt only */ -#define CONFIG_BOOTCOMMAND "" - -#define CONFIG_USBID_ADDR 0x34052c46 - -#define CONFIG_SYS_L2CACHE_OFF - -#endif /* __BCM23550_W1D_H */