-----Original Message----- From: Prafulla Wadaskar Sent: 20 July 2012 12:10 To: 'Holger Brunck'; u-boot@lists.denx.de Cc: Gerlando Falauto; Valentin Longchamp; Marek Vasut Subject: RE: [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust
-----Original Message----- From: Holger Brunck [mailto:holger.brunck@keymile.com] Sent: 20 July 2012 18:04 To: u-boot@lists.denx.de Cc: Gerlando Falauto; Holger Brunck; Prafulla Wadaskar; Valentin Longchamp; Marek Vasut Subject: [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust
From: Gerlando Falauto gerlando.falauto@keymile.com
Size of the SDRAM chips might differ between any two (otherwise identical) instances of the same board. So add a function which
reads
out the current ram size and set them in the SDRAM size register of kirkwood.
Signed-off-by: Gerlando Falauto gerlando.falauto@keymile.com Signed-off-by: Holger Brunck holger.brunck@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com cc: Valentin Longchamp valentin.longchamp@keymile.com cc: Marek Vasut marex@denx.de
chages for v3:
- rename dram_size_fixup to kw_sdramsize_adjust and move them to
kirkwood/dram.c
changes for v2:
- rebase to current u-boot-marvell.git master branch
arch/arm/cpu/arm926ejs/kirkwood/dram.c | 11 +++++++++++ arch/arm/include/asm/arch-kirkwood/cpu.h | 1 + 2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c index 5e2f9d8..9f97964 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c @@ -97,6 +97,17 @@ u32 kw_sdram_bs(enum memory_bank bank) return result; }
+void kw_sdram_size_adjust(void)
I think you must pass bank_id to this function so that one can tune any/all of the four available DRAM banks.
Hi Hogler This has not yet closed hence not pulled this patch series.
Do you have any comments on this?
Regards... Prafulla . . .