On Thu, Feb 02, 2023 at 12:37:45AM +0100, Linus Walleij wrote:
This adds a simple Northstar "BRCMNS" board to be used with the BCM4709x and BCM5301x chips.
The main intention is to use this with the D-Link DIR-890L and DIR-885L routers for loading the kernel into RAM from NAND memory using the BCH-1 ECC and using the separately submitted SEAMA load command, so we are currently not adding support for things such as networking.
If other board need other ECC for example, they need to create a separate DTS file and augment the code, but I don't know if any other users will turn up.
Cc: Rafał Miłecki rafal@milecki.pl Signed-off-by: Linus Walleij linus.walleij@linaro.org
As it stands, this fails to link: arm: + bcmns +(bcmns) arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function `nand_init': +(bcmns) drivers/mtd/nand/raw/nand.c:159: undefined reference to `board_nand_init' +(bcmns) make[1]: *** [Makefile:1752: u-boot] Error 1 +(bcmns) make: *** [Makefile:177: sub-make] Error 2