Since the introduction of the pinctrl and clk driver and the dts file, remove unneeded hard coded related code from the board file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 19 ------------------- 1 file changed, 19 deletions(-)
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index 2b9da91..c4d67a7 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -6,14 +6,12 @@ */
#include <common.h> -#include <mmc.h> #include <asm/io.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/arch/clk.h> -#include <atmel_mci.h> #include <net.h> #include <netdev.h> #include <spl.h> @@ -65,20 +63,12 @@ static void sama5d3_xplained_usb_hw_init(void) #ifdef CONFIG_GENERIC_ATMEL_MCI static void sama5d3_xplained_mci0_hw_init(void) { - at91_mci_hw_init(); - at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* MCI0 Power */ } #endif
int board_early_init_f(void) { - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - at91_periph_clk_enable(ATMEL_ID_PIOD); - at91_periph_clk_enable(ATMEL_ID_PIOE); - at91_seriald_hw_init();
return 0; @@ -122,15 +112,6 @@ int board_eth_init(bd_t *bis) return 0; }
-#ifdef CONFIG_GENERIC_ATMEL_MCI -int board_mmc_init(bd_t *bis) -{ - atmel_mci_init((void *)ATMEL_BASE_MCI0); - - return 0; -} -#endif - /* SPL */ #ifdef CONFIG_SPL_BUILD void spl_board_init(void)