Hi
I am stuck at the position where iam not getting any data on USB bus. I am using the ISP1562 chip on my PCI and using the OHCI code. I am able to reset and initialize the controller as i am able to see the reset signal and High speed chirp signal on the bus but there is no data on the bus. It shows the invalid packet on with all 0xFF at the first time i connect the mass storage device and running the usb reset command what could be the problem ? How i have to map the PCI memory ? I though that it could be the invalid memory access as i am taking the gohci and hcca structure by just taking it as an array and the controller HcHcca registers are unable to access that location it 0x7ffa0000 in my case where my PCI memory is mapped at 0x80000000
Need some help Regards
Markus Klotzbücher-2 wrote:
Dear Matthias,
Matthias Fuchs matthias.fuchs@esd-electronics.com writes:
is someone currently working on the testing-USB branch? Does it contain the most up to date USB code?
Yes, and no. I've got a couple of patches for the generic OHCI driver which have not been merged yet, because I want to do some more testing. I'll try to do this soon.
I have to add support for a PCI OHCI controller on a 405 board. This will result in some modifications (endianess + bus offsets) of drivers/usb_ohci.c.
Ok.
Is someone else using a PCI OHCI controller on a board that I might have missed to check?
Not that I know of.
Regards
Markus Klotzbuecher
Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=D... _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users