Add support for the OTG port on the mx35pdk Personality board.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Tested-by: Stefano Babic sbabic@denx.de Cc: Stefano Babic sbabic@denx.de Cc: Marek Vasut marex@denx.de --- Changes for v2: - Tested by Stefano.
.../board/freescale/mx35pdk/lowlevel_init.S | 4 ++++ .../board/freescale/mx35pdk/mx35pdk.c | 19 +++++++++++++++++++ .../include/configs/mx35pdk.h | 14 ++++++++++++++ 3 files changed, 37 insertions(+)
diff --git u-boot-usb-76454b2.orig/board/freescale/mx35pdk/lowlevel_init.S u-boot-usb-76454b2/board/freescale/mx35pdk/lowlevel_init.S index 698c4cf..6f4d4e0 100644 --- u-boot-usb-76454b2.orig/board/freescale/mx35pdk/lowlevel_init.S +++ u-boot-usb-76454b2/board/freescale/mx35pdk/lowlevel_init.S @@ -178,6 +178,10 @@ orr r1, r1, #0x00000C00 orr r1, r1, #0x00000003 str r1, [r0, #CLKCTL_CGR1] + + ldr r1, [r0, #CLKCTL_CGR2] + orr r1, r1, #0x00C00000 + str r1, [r0, #CLKCTL_CGR2] .endm
.macro setup_sdram diff --git u-boot-usb-76454b2.orig/board/freescale/mx35pdk/mx35pdk.c u-boot-usb-76454b2/board/freescale/mx35pdk/mx35pdk.c index 7cb6b30..e9ef4d1 100644 --- u-boot-usb-76454b2.orig/board/freescale/mx35pdk/mx35pdk.c +++ u-boot-usb-76454b2/board/freescale/mx35pdk/mx35pdk.c @@ -97,6 +97,24 @@ static void setup_iomux_spi(void) mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION); }
+static void setup_iomux_usbotg(void) +{ + int in_pad, out_pad; + + /* Set up pins for USBOTG. */ + mxc_request_iomux(MX35_PIN_USBOTG_PWR, MUX_CONFIG_SION | MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_USBOTG_OC, MUX_CONFIG_SION | MUX_CONFIG_FUNC); + + in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE | + PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS | + PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW; + out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE | + PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW; + + mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad); + mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad); +} + static void setup_iomux_fec(void) { int pad; @@ -188,6 +206,7 @@ int board_early_init_f(void) __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
setup_iomux_i2c(); + setup_iomux_usbotg(); setup_iomux_fec(); setup_iomux_spi();
diff --git u-boot-usb-76454b2.orig/include/configs/mx35pdk.h u-boot-usb-76454b2/include/configs/mx35pdk.h index 826c912..69b7d23 100644 --- u-boot-usb-76454b2.orig/include/configs/mx35pdk.h +++ u-boot-usb-76454b2/include/configs/mx35pdk.h @@ -110,6 +110,8 @@ #define CONFIG_NET_RETRY_COUNT 100 #define CONFIG_CMD_DATE
+#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE #define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION @@ -242,6 +244,18 @@ #define CONFIG_MXC_NAND_HWECC #define CONFIG_SYS_NAND_LARGEPAGE
+/* EHCI driver */ +#define CONFIG_USB_EHCI +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_MXC +#define CONFIG_MXC_USB_PORT 0 +#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ + MXC_EHCI_POWER_PINS_ENABLED | \ + MXC_EHCI_OC_PIN_ACTIVE_LOW) +#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) + /* mmc driver */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC