This series collects several board-enablement fixes for the Gumstix Overo as well as switching to BCH8 for NAND ECC, updating the UBI boot sequence for DTB-based boots, and correcting a RAM configuration for Overo COMs of Revision 0.
This series follows after the series previously submitted: http://lists.denx.de/pipermail/u-boot/2015-April/211651.html
Arun Bharadwaj (2): omap3: overo: Add DTS support for TobiDuo expansion overo: Override RAM setup for rev. 0 boards
Ash Charles (4): omap3: overo: Set the Arbor43C 'expansionname' overo: Add support for Palo35 expansion board omap3: overo: Use software BCH8 ECC for NAND omap3: overo: Allow boot with kernel in UBI rootfs
board/overo/overo.c | 3 +++ board/overo/spl.c | 2 +- include/configs/omap3_overo.h | 32 ++++++++++++++++++++++++++++---- 3 files changed, 32 insertions(+), 5 deletions(-)